TRENDnet TV-IP600 User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security Camera
  5. TV-IP600
  6. User manual

TRENDnet TV-IP600 User Manual

Hide thumbs Also See for TV-IP600:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TV-IP600

Summary of Contents for TRENDnet TV-IP600

  • Page 2: Table Of Contents

    CONTENTS ABOUT THIS USER’S GUIDE ..................... 1   INTRODUCTION ........................2   Features and Benefits ......................... 2  Unpacking the Package ......................3  System Requirements ......................... 4  Default Settings ........................... 5  Camera Hardware Components ..................... 6  Front Panel Components ......................6  LED Indicators ..........................
  • Page 3 Reset ............................60  Factory Reset ..........................60  Firmware Upgrade ........................61  Backup ............................62  Help .............................. 63  About ............................63  Viewing Video ..........................64  Uploading/E-mailing Video ......................65  Controlling the Camera ........................ 66  Adjusting the Viewing Angle ...................... 66  Storing Positions ........................67  Swinging the Camera ........................

  • Page 4: About This User's Guide

    TV-IP600/W Wireless Network Camera About This User’s Guide This User Guide provides instructions on how to install the TV-IP600/W Wireless Network camera and use it for camera monitoring applications. Camera monitor applications are accessible through an Ethernet or 802.11b/g wireless local area network. The following chapters are included in this User Guide: •...

  • Page 5: Introduction

    TV-IP600/W Wireless Network Camera Introduction Thank you for purchasing the TV-IP600/TV-IP600W Pan/Tilt (Wireless) Internet Camera, a standalone system that can be connected directly to an Ethernet or Fast Ethernet connection. The TV-IP600W also supports wireless transmissions based on the IEEE 802.11g standard.

  • Page 6: Unpacking The Package

    TV-IP600/W Wireless Network Camera Unpacking the Package Open the shipping carton and carefully remove all items. Check that you have the following: • One TV-IP600 or TV-IP600W Internet Camera Server • One Detachable Antenna (TV-IP600W only) • One Multi-Language Quick Installation Guide •...

  • Page 7: System Requirements

    TV-IP600/W Wireless Network Camera System Requirements Networking • Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet • Wireless Local Area Network: IEEE 802.11b/g Wireless LAN (TV-IP600W only) Computer • CPU: 1.3GHz or above • Memory: 128 MB or above •...

  • Page 8: Default Settings

    TV-IP600/W Wireless Network Camera Default Settings Use the default settings to access the web-based management software and live video display. Default configuration settings Username This is the Username you will be prompted to enter when you access the TV- IP600/W configuration screens using a Web browser. The default Username is admin.

  • Page 9: Camera Hardware Components

    TV-IP600/W Wireless Network Camera Camera Hardware Components This section provides information about the Camera’s hardware components: Front Panel Components Adjustable focus camera lens Power LED Link LED indicator indicator Front panel of TV-IP600/W LED Indicators This LED indicator lights steady orange when a valid Ethernet link is established.

  • Page 10: Rear Panel Components

    Reset button Power Ethernet receptacle Port Rear Panel view of TV-IP600/W Connect to Ethernet LAN. The port is auto MDI-II/MDI-X and auto- Ethernet Port negotiation for port speed. Use to reset device to factory default settings including IP address and Reset Button administrator user name and password.

  • Page 11: Installing The Camera

    TV-IP600/W Wireless Network Camera Installing the Camera The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold. Make sure the power adapter and its cord and the Ethernet cable are safely arranged so they do not create a tripping hazard and will not be disturbed by people or objects moving past.

  • Page 12: Connect Ethernet Cable

    TV-IP600/W Wireless Network Camera Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or better Ethernet cable to the network cable connector located on the camera’s left side panel, and then attach it to the network. The Ethernet...

  • Page 13: Reset Camera

    If using the TV-IP600W Wireless Camera, the default SSID is “TRENDNet”. The administrator’s default user name is admin and the password is admin. Use the Setup Wizard shipped with the camera to reconfigure it or access it through the web-based...

  • Page 14: Security

    TV-IP600/W Wireless Network Camera Security To ensure the highest level of security and prevent unauthorized usage of the Camera, the Administrator account has exclusive access to the System Administration configuration settings. The Administrator account can create up to 64 users and configure different privilege levels for each user.

  • Page 15: Application

    TV-IP600/W Wireless Network Camera Application The TV-IP600 / TV-IP600W camera can be applied in a wide range of applications, including: • Monitoring of local and remote places and objects, such as construction sites, hospitals, amusement parks, schools and day-care centers by using a web browser.

  • Page 16: Using The Utility

    TV-IP600/W Wireless Network Camera Using the Utility This chapter describes the software utilities for the IP Camera, including how to set up your Camera with the utility. The SetupWizard has a user-friendly interface that allows you to setup the Camera easily.
  • Page 17 TV-IP600/W Wireless Network Camera 2. The next window asks you whether you want to accept the License Agreement or not. • If you agree with the Licensing Agreement, click the I Agree radio button and the Next > button. •...
  • Page 18 TV-IP600/W Wireless Network Camera 5. The software will start to install. The following window appears, showing the progress of the installation: 6. When installation is complete the following window appears to confirm that the SetupWizard has installed successfully: • Click Close to exit the installation After installing the SetupWizard, the application program for the Camera is automatically installed on your computer.
  • Page 19 Launching the SetupWizard To launch the SetupWizard, click the SetupWizard icon on your desktop or go to Start > Programs > TRENDnet > SetupWizard > SetupWizard to start the appilcation. SetupWizard- Install Your Camera Connect the camera to your LAN using the provided RJ45 cable.
  • Page 20 TV-IP600/W Wireless Network Camera SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on your network: Click on the camera you want to configure. Click Next to continue.
  • Page 21 TV-IP600/W Wireless Network Camera SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configuring the camera settings: Type a User ID in the ID field. Type a password for the User in the Password field.
  • Page 22 TV-IP600/W Wireless Network Camera SetupWizard- Change Password The following screen allows you to change the default admin password: Carry out the following if you want to change the admin password: Tick the Change Password checkbox Type in a New Password in the New Password field and confirm it in the Confirm...
  • Page 23 TV-IP600/W Wireless Network Camera SetupWizard- Select a Connection Option The following window allows you to specify the connection method used by your camera network. Click the radio button of the network environment your camera is connected to. The available options are:...
  • Page 24 TV-IP600/W Wireless Network Camera SetupWizard – Select a Connection Option - PPPoE If your connection method is PPPoE, click the PPPoE radio button and click Next: The following window appears: Type the User Name used to connect to your PPPoE connection in the User Name field.
  • Page 25 TV-IP600/W Wireless Network Camera SetupWizard- Select a Connection Option- DHCP If your connection method is DHCP, click the DHCP radio button and click Next:...
  • Page 26 TV-IP600/W Wireless Network Camera SetupWizard- Select a Connection Option- Fixed IP If your connection method is Fixed IP, click the Fixed IP radio button: The following window appears: Type in the IP Address, Subnet Mask, Default Gateway, Primary DNS Server IP address and Secondary DNS Server IP Address in the appropriate fields.
  • Page 27 TV-IP600/W Wireless Network Camera SetupWizard- Setup Wireless (For TV-IP600W only) After choosing your connection method, the following window appears: Choose if you want to connect to your camera using the wireless connection or not by clicking the appropriate radio button.
  • Page 28 TV-IP600/W Wireless Network Camera SetupWizard- Setup Wireless (For TV-IP600W only) If you selected the option to use a wireless connection to connect to your camera the following window appears: Choose the Access Point you want to connect the camera to from the Available AP drop- down menu.
  • Page 29 TV-IP600/W Wireless Network Camera SetupWizard- Other Settings The following window allows you to configure additional camera settings: Type a name to help you identify the camera in the Camera Name field. Set the camera date and time from the Camera Time drop-down menus. To use the time settings from your computer, click the Copy Local Time button.
  • Page 30 TV-IP600/W Wireless Network Camera SetupWizard- Setting Up The Camera The following window appears, summarizing the network settings of your camera: When you have finished setting up the Camera click the Next button. To make any changes to your Camera settings, click the Previous button.
  • Page 31 TV-IP600/W Wireless Network Camera SetupWizard- Complete After the camera has restarted, the following window will appear: Click the hyper-link to connect to the camera web interface. If you want to setup an additional camera, click the Setup Another Camera button.

  • Page 32: Using The Camera Web Manager

    For the initial setup, use the SetupWizard program located on the TV-IP600/W CD-ROM included with the camera. Use the IPCam Wizard to assign an IP address and other network settings. Once the camera has an IP address, follow the instructions below to access the camera’s web...

  • Page 33: Login

    TV-IP600/W Wireless Network Camera Login To access the web manager directly from a computer or on a network without a DHCP server running, use the default IP address of the camera in the browser address entry to access the web manager. Type http://192.168.10.30 in the address bar and press Enter.

  • Page 34: Administration

    TV-IP600/W Wireless Network Camera Administration Click the ADMINISTRATION link to view the menus in the Administration Menu directory. The following menus are available in the Administration Menu directory: Status System, Video, Wireless (only for TV-IP600W camera), Network and Active Users. To access a menu click the link of the item you want to configure.

  • Page 35: Status

    TV-IP600/W Wireless Network Camera Status The following menus are available in the Status: System, Video, Wireless (only for TV-IP600W camera), Network and Active Users. To access a menu click the link of the item you want to view. System Status...

  • Page 36: Video Status

    TV-IP600/W Wireless Network Camera Video Status Click the Video link from the column on the left hand-side to display the Video Status of your camera as shown on the screen below: Video Status display Video Status This section displays the video configuration of the camera, including the Video Resolution,...

  • Page 37: Wireless Status (For Tv-Ip600W Only)

    TV-IP600/W Wireless Network Camera Wireless Status (for TV-IP600W only) Click the Wireless link from the column on the left hand-side to display the Wireless Status of your camera as shown on the screen below: Wireless Status display Wireless Status This section displays information about the Camera’s Wireless LAN connection, including the Connection Mode (Infrastructure or Ad-Hoc), Link (whether the wireless connection is up or down), SSID, Channel, Transmission Rate and Encryption (whether encryption is enabled or not).

  • Page 38: Network Status

    TV-IP600/W Wireless Network Camera Network Status Click the Network link from the column on the left hand-side to display the Network Status of your camera as shown on the screen below: Network Status display Network Status This section displays information about the Camera’s LAN connection, including the IP Address,...

  • Page 39: Active Users

    TV-IP600/W Wireless Network Camera Active Users Click the Active Users link from the column on the left hand-side to display the Active Users currently connected to your camera as shown on the screen below: Active Users display Active Users This section displays the IP address and Name of each user currently connected to the Camera,...

  • Page 40: Configuration

    Camera Name: Use this field to enter a descriptive name for the device. The default name of the Camera is the same as the Camera model name. Therefore, for the TV-IP600 the default name is TV-IP600 and for the TV-IP600W the default name is TV-IP600W. The maximum length allowed for the Camera Name is 32 (printable ASCII) characters.
  • Page 41 TV-IP600/W Wireless Network Camera The default setting for the Admin ID is “admin”. The maximum length allowed for the Admin ID is 12 (printable ASCII) characters. The default setting for the Admin Password is “password”.The maximum length allowed for the admin password is 8 (printable ASCII) characters.

  • Page 42: Video Settings

    TV-IP600/W Wireless Network Camera Video Settings Click the Video link from the column on the left hand-side to configure the image configuration of your camera. Video Settings menu Video Settings: Use this section to configure the video settings for your camera as described below: •...
  • Page 43 TV-IP600/W Wireless Network Camera • Saturation Control: Use the buttons to adjust the saturation level. The default setting is • Light Frequency: Click the radio buttons to adjust the light frequency to suit the area the camera is viewing. The available options are 50 Hz or 60 Hz (default).

  • Page 44: Wireless Setup (For Tv-Ip600W Only)

    TV-IP600/W Wireless Network Camera Wireless Setup (for TV-IP600W only) The TV-IP600W Wireless Network Camera supports normal wireless LAN functions for 802.11b/g wireless networks including WEP or WPA basic security settings. Wireless Configuration menu...
  • Page 45 TV-IP600/W Wireless Network Camera Wireless Interface Use the Wireless Interface menu to configure the Camera’s wireless interface. Wireless Interface menu • Connection Mode: Click a radio button to determine the type of wireless communication for the camera. The two options are Infrastructure and Ad-Hoc, with Infrastructure being the default.
  • Page 46 TV-IP600/W Wireless Network Camera Encryption Use the Encryption menu to configure the Camera’s Encryption settings. Wireless Encryption menu • WEP Encryption: Wireless network communications can be intercepted easily. WEP (Wired Equivalent Privacy) is an encryption method specified by the IEEE 802.11g standard to make intercepting wireless communication by unauthorized parties more difficult.
  • Page 47 TV-IP600/W Wireless Network Camera • WEP Key Format: If enabling WEP Encryption you should decide whether to use an ASCII or HEX format for your WEP Key. Use the radio buttons to choose an ASCII or HEX format for your WEP key and type the WEP keys used in the Key 1 ~ 4 fields.
  • Page 48 TV-IP600/W Wireless Network Camera Advanced Setting Use the Advanced Setting menu to configure the Camera’s advanced settings. Advanced Setting menu • Beacon Interval: Type a value to define the time interval between two beacons being sent. • Preamble: A preamble is a signal used in a wireless environment to synchronize the transmitting time, including Synchronization and Start frame delimiter.

  • Page 49: Network Settings

    TV-IP600/W Wireless Network Camera Network Settings Click the Network Setup link to view menus for IP network settings, PPPoE configuration, DDNS, HTTP port configuration and UPnP configuration. Network Setup menus...
  • Page 50 TV-IP600/W Wireless Network Camera TCP/IP • IP Address Mode: Click a radio button to define the IP Address Mode: Fixed IP You can select this option and enter the IP address directly. The default settings are: • IP Address – 192.168.10.30 •...

  • Page 51: User

    TV-IP600/W Wireless Network Camera User Use the User menus to add, edit and delete users for your camera. User menu User Access Control The Administrator has the authority to create additional users on the Camera and the privileges they have when accessing the Camera with the management software.
  • Page 52 TV-IP600/W Wireless Network Camera Define Users Use this section to add new users and define the privileges of the new user. Define Users menu • Add User: Type a name for the new user in the User Name field, a password in the Password field.

  • Page 53: Date/Time

    TV-IP600/W Wireless Network Camera Date/Time Use the Date/Time menu to set the Camera’s time settings Date/Time menu Date/Time Setting Use the radio buttons to specify if the Camera should set its time using a time server or if the time or be setup manually, •...

  • Page 54: Upload

    TV-IP600/W Wireless Network Camera Upload Use the Upload menu to setup the configuration for the FTP Server, schedule FTP Server Uploads and configure manual FTP Server Uploads. Upload menu...
  • Page 55 TV-IP600/W Wireless Network Camera FTP Server Use this section to configure the basic settings of your FTP server. FTP Server menu • Host Address: Use this field to type the IP address of the target FTP server. • Port Number: Use this field to specify the port used by your FTP server. The standard port number for FTP is 21, the default setting.
  • Page 56 TV-IP600/W Wireless Network Camera Time Schedule Use this section to enable images to be uploaded to an FTP Server at regular intervals. Time Schedule menu • Enable upload image to FTP server: Tick the checkbox to enable images from the Camera to be uploaded to an FTP server.
  • Page 57 TV-IP600/W Wireless Network Camera • File: Since you may not upload only one image to the FTP server, you can use this field to specify the fling rule. Use the radio buttons to specify the option that you want to use. The available options are Overwrite, Date/Time Suffix and Sequence Number Suffix Up to.

  • Page 58: E-Mail

    TV-IP600/W Wireless Network Camera E-mail Use the E-mail menu to setup the configuration of the E-mail account, time schedule and manual operation settings. E-mail menu...
  • Page 59 TV-IP600/W Wireless Network Camera E-mail Account Use this section to configure your E-mail Account configuration. E-mail Account settings • SMTP Server Address: SMTP (Simple Mail Transfer Protocol) is a protocol used for sending e-mail messages. Type in the mail server address that will be used to send e-mail messages between the different servers on your network.
  • Page 60 TV-IP600/W Wireless Network Camera Time Schedule Use this section to section to enable images to be e-mailed to the specified e-mail account at regular intervals E-mail Time Schedule settings • Enable e-mail image to e-mail account server: Tick the checkbox to enable images from the Camera to be e-mailed to an e-mail recipient.
  • Page 61 TV-IP600/W Wireless Network Camera Manual Operation Use this section to E-mail Manual Operation settings • Enable e-mail image to e-mail account: Tick the checkbox to enable images from the Camera to be e-mailed to an e-mail recipient. • Interval: Type a value in seconds to determine the time interval between two images being...

  • Page 62: Tools

    TV-IP600/W Wireless Network Camera Tools The following menus are available in the Tools directory: FTP Server Test, E-mail Test, Reset, Factory Reset, Firmware Upgrade and Backup. To access a menu click the link of the item you want to view.

  • Page 63: Reset

    TV-IP600/W Wireless Network Camera Reset This option allows you to restart your Camera. Reset menu Reset Device Clicking the Yes button will restart the Camera, retaining your saved settings, as if you were turning the device off and on. If you do not want to restart the Camera, exit this window without clicking Yes.

  • Page 64: Firmware Upgrade

    TV-IP600/W Wireless Network Camera Firmware Upgrade When new firmware is available, you can upgrade it through this window. To upgrade the camera firmware, make sure the correct firmware file is located on your computer. Click the Browse button to locate the file. After locating the file, click the Upload button to load the file. It will take several seconds to load the firmware and restart the camera.

  • Page 65: Backup

    TV-IP600/W Wireless Network Camera Backup The Backup window allows you to Backup or Restore the Camera settings. Backup Settings menu Backup Device Configuration to File To save configuration settings for the camera to a file on a local hard disk, click the Backup button.

  • Page 66: Help

    TV-IP600/W Wireless Network Camera Help The Help window displays help topics for the Camera. About The About option displays the Camera’s model name and version. About menu...

  • Page 67: Viewing Video

    TV-IP600/W Wireless Network Camera Viewing Video The TV-IP600W allows you to view video images using ActiveX or Java in your web browser. Click View Video – Active X or Java from the Welcome screen to access the video images from your browser.

  • Page 68: Uploading/E-Mailing Video

    TV-IP600/W Wireless Network Camera Uploading/E-mailing Video In the View Video – Active X or Java windows, it is possible to turn the Upload Image and E-mail Image options ON of OFF. Simply click the corresponding ON or OFF buttons to turn the Upload Image or E-mail Image options ON or OFF.

  • Page 69: Controlling The Camera

    TV-IP600/W Wireless Network Camera Controlling the Camera You can control the Camera’s viewing angle using the control buttons on the left-hand side of the viewing window. Camera Control Buttons Adjusting the Viewing Angle To adjust the camera’s viewing angle, simply click the Up / Down / Left / Right buttons. These buttons allow you to easily move the Camera’s lens to focus on the object that you want.

  • Page 70: Storing Positions

    TV-IP600/W Wireless Network Camera Storing Positions The Camera allows you to store positions that you want to monitor regularly, allowing you to quickly move the Camera’s lens to focus on objects that you want to monitor regularly. You can store up to 24 positions in the Camera (the number “0” is reserved for the default position “Home”).

  • Page 71: Ipview Pro 2.0

    To launch IPView Pro 2.0, double click on the IPView Pro 2.0 icon on your desktop or go to Start > Programs > TRENDnet > IPView Pro 2.0 > IPView Pro 2.0. If this is the first time using the...
  • Page 72 TV-IP600/W Wireless Network Camera Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.0 software is launched. This menu is used to add cameras to the user interface for monitoring. After the first time running the software, this menu can be accessed at anytime from the Configuration menus.
  • Page 73 TV-IP600/W Wireless Network Camera If the camera does not appear listed, click the Input the location of camera tab above the list to view a new menu. Enter the IP address or the URL (for example, ipcam.ddns.org) of the camera being added, type the user name and password and click the Preview to verify that a link can be established.

  • Page 74: Ipview Pro 2.0 User Interface

    TV-IP600/W Wireless Network Camera IPView Pro 2.0 User Interface Below is a general description of the user interface. Item Description Live video display Display area for single or multiple cameras of live video. Right click on area any display area to view a list of quick configure options for that camera including the “Replace camera content …”...
  • Page 75 TV-IP600/W Wireless Network Camera Display Controls The primary display and IPView Pro 2.0 control icons are described in detail below. When there are more than one camera displays viewed, one of the displays can be selected for management or additional changes. Simply left click on any display to select it. Notice the border around the display is bright aqua blue, indicating the “selected”...
  • Page 76 TV-IP600/W Wireless Network Camera Live video display controls Use the video display controls to change the view of the live video display. This is useful for multiple camera application. Click the arrows to manually cycle through the active camera’s live displays when using a single camera display screen.

  • Page 77: Camera Configuration With Ipview Pro 2.0

    TV-IP600/W Wireless Network Camera Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel of the IPView Pro 2.0 user interface. Configuration options include adding and deleting cameras from the display view, configuration of motion detection and digital input with schedules, recording options, email alerts and other network settings.
  • Page 78 TV-IP600/W Wireless Network Camera 2. Select the camera to add from the list, enter the administrator’s user name (ID:) and password, a preview of the live video display will appear. Click the OK, add this camera button, a confirmation message informs when the camera is connected and added to the IPView Pro 2.0 monitoring group.

  • Page 79: Schedule Recording With Ipview Pro 2.0

    TV-IP600/W Wireless Network Camera Schedule Recording with IPView Pro 2.0 Use the Camera Settings menu to create schedules for recording and apply the schedules to any camera. Click the Camera Settings tab to view the Schedule Recording menu (the first menu viewed in the Camera Settings menu tab).

  • Page 80: Setup Motion Detection And Digital Input With Ipview Pro 2.0

    TV-IP600/W Wireless Network Camera Setup Motion Detection and Digital Input with IPView Pro 2.0 The Camera Settings menus include Motion Detection setup and Digital Input control. Each menu has the schedule option to apply a schedule for the action taken or always take the specified action.
  • Page 81 TV-IP600/W Wireless Network Camera IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserve and manage allowed memory storage (disk space) and for video file management. Recorded files can be limited by time elapsed or by size.
  • Page 82 TV-IP600/W Wireless Network Camera IPView Pro 2.0 Miscellaneous Options The Other Options available for configuration include Proxy server setup, email notification, scan interval and alert type settings.

  • Page 83: Playing Video Files On A Computer

    TV-IP600/W Wireless Network Camera Playing Video Files on a Computer IPCamPlayer software is installed on the monitoring station or administrator’s system along with the IPView Pro 2.0 monitoring software. Use it to playback and manage recorded video from the cameras added to the IPView Pro 2.0 group. In order to use the software however, it is necessary to first install the ffdshow package of codecs used for media files.

  • Page 84: Load Saved Video Files

    My Documents folder in Windows. The file folders are named according to the IP address and camera model. For example, 192.168.10.30_TV-IP600/W is the name of the file folder for the TV-IP600/W using the default (non-DHCP) IP address. IPCamPlayer User Interface...

  • Page 85: Play Video Files

    TV-IP600/W Wireless Network Camera To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be viewed and add them to the list. Click the Search Files button in the IPCamPlayer main interface and a new menu appears.

  • Page 86: Ffdshow

    TV-IP600/W Wireless Network Camera ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats. It is free software used on Windows systems and enables the user to tweak media playback and select specific codecs and formats. For use with the IPCamPlayer, the default settings used for ffdshow installation are all that is needed.
  • Page 87 TV-IP600/W Wireless Network Camera 3. The InstallShield Wizard will appear, click Next in the welcome screen. 4. Accept the default location (Windows Programs folder) on the system for placement or Browse to choose an alternative, Click Next to continue.
  • Page 88 TV-IP600/W Wireless Network Camera 5. Click to check the components that will be installed. For IPCamPlayer it is only necessary to use the default components already selected. Click Next to continue. 6. Accept the default destination folder (ffdshow) or Browse to choose an alternative, Click...
  • Page 89 TV-IP600/W Wireless Network Camera 7. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the default formats already selected. Click Next to continue. 8. Click to check the video applications that use ffdshow. For IPCamPlayer it is only...
  • Page 90 TV-IP600/W Wireless Network Camera 9. Click to check the audio applications that use ffdshow. For IPCamPlayer it is only necessary to use the default applications already selected. Click Next to continue. 10. Choose a speaker setup or choose Disable mixer if unsure. The audio function will work regardless of what speaker setup is chosen.
  • Page 91 TV-IP600/W Wireless Network Camera 11. Review the information and click Install if satisfied that it is correct to install the necessary codecs. The installation will take a few seconds. 12. If desired, any of the three configuration utilities included with the ffdshow installation can be launched by checking the appropriate box.

  • Page 92: Appendix

    TV-IP600/W Wireless Network Camera Appendix A. Frequently Asked Questions Internet Camera Features What is an Internet Camera? An Internet Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network and supported by the wireless transmission based on the IEEE 802.11g standard.
  • Page 93 TV-IP600/W Wireless Network Camera Internet Camera Installation Can the Internet Camera be used outdoors? The Camera is not water-proof and it is not recomended to use it outdoors. But you can use our Outdoor Internet Camera Enclosure TV-H500 or the one with Heater and Fan model TV-H510 to install the camera outdoor.

  • Page 94: Ping Your Ip Address

    TV-IP600/W Wireless Network Camera B. PING your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accesible by sending a packet to the specific address and waiting for a reply. It can also be a useful tool in confirming whether an IP address conflicts with the Camera’s on the network.
  • Page 95 TV-IP600/W Wireless Network Camera 4. Type ping x.x.x.x, where x.x.x.x is the IP address of the Camera, as shown below: Reply messages indicate that there is another device on the nework, as indicated in the above window.

  • Page 96: Troubleshooting

    TV-IP600/W Wireless Network Camera C. Troubleshooting I cannot access the Camera from a web browser? The possible cause might by that the IP address of the Camera is already being used by another device. To correct the possible problem, you need to disconnect the Camera from the network first.
  • Page 97 TV-IP600/W Wireless Network Camera A2.2: Click the Network Connections icon as shown below:...
  • Page 98 TV-IP600/W Wireless Network Camera A2.3: Double-click the network adaptor that is connected to your Camera: Select TCP/IP from the “Network“ dialog box and from the TCP/IP Properties:...
  • Page 99 TV-IP600/W Wireless Network Camera Click the Properities button. Double-click the Internet Protocol (TCP/IP) item and check that the first 3 bytes of your computer’s IP address correspond with the first 3 bytes of the Camera’s. If the Camera is situated on a different subnet than your workstation, you will not be able to configure the Camera.
  • Page 100 TV-IP600/W Wireless Network Camera Why does the Camera work locally but not externally? The Camera’s connection might be being blocked by a Firewall. Please check with your System Administrator to see if your Firewall allows access to the Canera. This could be caused by the Default Router setting. Double-check that the Camera’s Default Router setting is correct.

  • Page 101: Time Zone Table

    TV-IP600/W Wireless Network Camera D. Time Zone Table Time Zone Location/Description (GMT - 12:00) Enjwetok, Kwajalein (GMT - 11:00) Midway Island, Samoa (GMT - 10:00) Hawaii (GMT - 09:00) Alaska (GMT - 08:00) Pacific Time (US & Canada; Tijuana) (GMT - 07:00)
  • Page 102 TV-IP600/W Wireless Network Camera Time Zone Location/Description (GMT + 01:00) Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT + 01:00) Sarajevo, Skopje, Sofija, Warsaw, Zagreb (GMT + 02:00) Athens, Istanbul, Minsk (GMT + 02:00) Bucharest (GMT + 02:00) Cairo (GMT + 02:00)

  • Page 103: Time Zone

    TV-IP600/W Wireless Network Camera Time Zone Location/Description (GMT + 09:00) Seoul (GMT + 09:00) Yakutsk (GMT + 09:30) Adelaide (GMT + 09:30) Darwin (GMT + 10:00) Brisbane (GMT + 10:00) Canberra, Melbourne, Sydney (GMT + 10:00) Guam, Port Moresby (GMT + 10:00)

  • Page 104: Adjusting Internet Camera Focus

    TV-IP600/W Wireless Network Camera E. Adjusting Internet Camera Focus To adjust the focus of the lens, you need to turn the lens slowly in either a clockwise or anti- clockwise direction until the desired image appears. Be sure to not over turn the lens in either direction as this will cause the Camera to be out of focus.

  • Page 105: Technical Specifications

    TV-IP600/W Wireless Network Camera G. Technical Specifications Camera  General   Sensor: 1/4” color CMOS SOC image sensor  Resolution: 640 x 480 pixels  Board Lens   Focal Length: 4.57mm  F/No: F1.9   Minimum illumination: 1 Lux @ F1.9  Focus depth: 20cm ~ infinity  View angle: horizontal: 46 degree, vertical: 35 degree  Image & Video  Compression: MJPEG  Exposure/white balance control: automatic  Resolution: up to 15fps for VGA (640x480), 30fps for QVGA (320x240), 30fps for  QQVGA (160x120)   Pan/Tilt  Pan: ‐156° ~ +156°  Tilt: ‐45° ~ +70°  Preset position: 24 positions  Hardware  Network   IEEE 802.3u 10/100Mbps Fast Ethernet, Auto‐MDIX  LED  Power, Link  Reset Button  Reset settings  Power Consumption  8 watts  Power  5V, 2.5A external power adapter  Dimension  TV‐IP600: 112 x 112 x 110mm (4.4 x 4.4 x 4.3 in.)  TV‐IP600W: 112 x 130 x 110mm (4.4 x 5.1 x 4.3 in.) ...
  • Page 106 TV-IP600/W Wireless Network Camera Netscape, and Google Chrome To Run Software  Windows XP, Vista  IPView Pro 2.0  Channel: supports up to 32 cameras  Record/Playback/Motion Detection  Network Protocols  IP, ARP, TCP, UDP, ICMP  DHCP Client, NTP Client, DNS Client, DDNS Client, SMTP Client, FTP Client  HTTP Server  PPPoE  UPnP  Management  Account  Up to 64 user accounts*  Remote  Remote management supported  Backup / Restore  Save/retrieve configuration files  Settings  Image  Brightness, contrast, noise reduction, saturation, sharpness, white balance, flip,  mirror (horizontal/vertical), black/white mode  Video  Encoding type: MJPEG  Resolution: 640 x 480, 320 x 240, 160 x 120  Frame rate: 1, 5, 7, 15, 20, Auto  Compression: 5 levels  Recording  Recording type: continuous, schedule or motion detection with software  Port Settings  HTTP port: 80 (default)  Digital Zoom  4x  Dynamic DNS  Yes ...
  • Page 107 TV-IP600/W Wireless Network Camera Security  64/128‐bit WEP, WPA‐PSK, WPA2‐PSK  Output Power  802.11b: 16dBm (typical)   802.11g: 12dBm (typical)  Receiving Sensitivity  802.11b: ‐82dBm at 11Mbps  802.11g: ‐66dBm at 54Mbps  Channel  1~11 (FCC), 1~13 (ETSI) ...

  • Page 108: Limited Warranty

    If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become the property of TRENDnet.
  • Page 109 MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN...
  • Page 110 TV-IP600/W Wireless Network Camera...

This manual is also suitable for:

Tv-ip600w

Table of Contents