TRENDnet User's Guide
4. The wizard will now search for your camera.
5. Select your camera. The wizard will show all cameras in the network. If there is
only one camera in the network, the wizard will automatically select it. The
wizard provides the Model Name and MAC Address of the camera. If you do
not see any of your camera(s) in the wizard, click Retry to scan the camera
again. Click Next to continue.
© Copyright 2014 TRENDnet. All Rights Reserved.
6. Change Password. The default username and password is admin. Tick the
Change Password checkbox to enter the new password details. The password
should be between 8 and 30 characters. Click Next to continue.
Note:
If you enter the incorrect admin details, you will be prompted to change the
configuration, as shown below.
TV-IP662WI
11