Related Manuals for TRENDnet TV-IP612P
Summary of Contents for TRENDnet TV-IP612P
- Page 1 Quick Installation Guide TV-IP612P 1.01...
-
Page 2: Table Of Contents
Table of Contents English 1. Before You Start Hardware Installation and Configuration Power over Ethernet (PoE) Installation Troubleshooting Version 08.20.2010... -
Page 3: English
1. Before You Start Package Contents TV-IP612P CD-ROM (Utility and User’s Guide) Multi-Language Quick Installation Guide Cat. 5 Ethernet Cable (1.5m/5ft.) Mounting Kit Power Adapter (12V DC, 2A) System Requirements A computer with a wired network adapter properly installed CD-ROM Drive VGA Resolution: 800 x 600 or above Web Browser: Internet Explorer (6.0 or higher) Router... -
Page 4: Hardware Installation And Configuration
2. Hardware Installation and Configuration Note: 1. It is recommended that you configure the IP Camera from a wired computer. 2. If you would like to use IPViewPro 2.0 software, please install the software by clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the CD for more information 1. - Page 5 5. Click Close. 6. Double click on the SetupWizard icon on your desktop. 7. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on the IP Camera. 8. Connect the Power Adapter to the IP Camera and then to a power outlet. 9.
- Page 6 12. Configure the Camera Name and Camera Time. Click Copy Local Time to automatically configure the Camera Time to match your computer. Then click Next. 13. If you would like to change the administrator password, click Change Password, enter a new password, retype the new password and then click Next.
- Page 7 17. Click on the following URL or click Link to open up the browser configuration. 18. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin 19. Click Live View to view live video. 20.
- Page 8 Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register register your product Online at: Thank you for choosing TRENDnet...
-
Page 9: Power Over Ethernet (Poe) Installation
3. Power over Ethernet (PoE) Installation Using the TV-IP612P with a PoE switch 1. Connect a RJ-45 cable from the Power Over Ethernet switch (e.g. TPE-80WS) to the LAN port on the IP Camera. 2. Verify that the LINK (RED) and Power (Solid Blue) LEDs are on. - Page 10 Using the TV-IP612P with an Injector (TPE-111GI) 1. Connect the Power Cord to the Injector. Then connect the Power Cord to an outlet. 2. Connect a CAT-5e/6 cable from a switch to the TPE-111GI's DATA IN port. 3. Connect a CAT-5e/6 cable from the TV-IP612P to the TPE-111GI's DATA OUT port.
-
Page 11: Troubleshooting
Configuration. If you do not have a DHCP server on your network, the default IP address is 192.168.10.30. The default administrator ID and password is admin. If you still encounter problems or have any questions regarding the TV-IP612P, please contact TRENDnet's Technical Support Department. - Page 16 Copyright ©2010. All Rights Reserved. TRENDnet.