TRENDnet TV-IP662WI User Manual page 56

TRENDnet User's Guide
3. In the Port Number section, assign an HTTP port of the camera. The default
HTTP Port on the camera is 80. The example shows above is using port number
9000.
4. Open the router's Web configuration page.
(In the example, TRENDnet's TEW-651BR Wireless N Home Router is used)
© Copyright 2014 TRENDnet. All Rights Reserved.
5. Go to Access > Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. CameraName)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Then click Add to add the application.
* Please refer to your router's user's manual for detail Virtual Server setting.
Some router might use Port Forwarding or Special applications for this
function. The setup steps should be very similar.
6. Open another web browser and enter your DDNS domain and camera's port
number. http://yourDomainName:PortNumber
TV-IP662WI
55