TRENDnet TV-IP662WI User Manual page 39

TRENDnet User's Guide
After selecting CBR as the Encode Mode, select the Bits Per Second (bps) value. Options
to choose from are between 64 Kbps and 4 Mbps. After selecting Quality as the Encode
Mode, select the Quality option. Options to choose from are Low, Fair, Standard, Good,
and Excellent.
Users can also enter a custom RSTP URL in the space provided.
In the Day/Night Mode section, we can configure the following.
The camera allows users to record data in day and night mode. The camera has IR LED's
for night mode. When selecting the Day mode, the viewing image is in normal color.
However, when you use Night mode, the viewing image turns black and white. The
reason for this is to create a clearer and smoother image. When you select the Auto
mode, the Day/Night function is concealed.
Please Note: This allows you to set the camera to switch automatically from day to night
mode (default) or to permanently set the color and Black/White operations. Also note,
even when the camera is set to color mode, it will switch to Black/White night vision if
there is no longer enough ambient light to support the color saturation.
Select the Day/Night Mode option from the drop-down list. Options to choose from are
Auto, Manual, Always day mode, Always night mode, and Schedule. When selecting
Auto, the camera will automatically switch between day and night modes depending on
the light conditions. When selecting Manual, the user can manually toggle between day
and night modes by clicking the
Always day mode or Always night mode the camera will stay on the mode selected
even when the light conditions change. When selecting the Schedule option, the camera
will toggle between day and night modes depending on the time schedule configured.
© Copyright 2014 TRENDnet. All Rights Reserved.
button on the Live View page. When selecting
After selecting the Auto option as the Day/Night Mode, we can configure the following.
Select the Sensitivity Level option from the drop-down list. There are three main
sensitivity point called Brightest, Median, and Darkest. In between these main
sensitivity points are numerical sensitivity values ranging from +1 to +7 between
Median and Brightest, and numerical sensitivity values ranging from -1 to -5 between
Median and Darkest. Selecting the sensitivity level closer to the Brightest option, will
switch the IR LEDs on earlier when the area becomes darker. Selecting the sensitivity
level closer to the Darkest option, will switch the IR LEDs on later when the area
becomes darker.
After selecting the Schedule option as the Day/Night Mode, we can configure the
following.
Enter the Day Time values in the spaces provided. First enter the starting hour and
minute values next to the From option and then enter the ending hour and minute
values next to the to option.
TV-IP662WI
38