Display Settings; Fixture Tests; Fixture Information - Chauvet Legend 330SR Spot User Manual

Display Settings

Overturn Display 1. Highlight Display Inverse.
LCD Backlight Off 1. Highlight Backlight Auto Off.
Backlight Brightness 1. Highlight Backlight Intensity.
Temperature Unit 1. Highlight Temperature Unit.

Fixture Tests

Automatic Fixture Test 1. Highlight Auto Test.
Manual Fixture Test 1. Highlight Manual Test and press <ENTER>.

Fixture Information

Fixture Operation Timer ·
Lamp Operation Timer 1. Highlight Lamp On Time (the accumulated lamp's operation time will show).
Firmware Version 1. Highlight Firmware Version.
Legend™ 330SR Spot User Manual Rev. 1
From the Main Menu, highlight Display Settings and press <ENTER>.
2. To overturn the display, press <ENTER>.
a. Select YES to turn the LCD around or NO to keep the normal LCD view.
b. Accept the selected option.
2. To configure the LCD backlight, press <ENTER>.
a. Select YES to automatically turn the LCD backlight off after 1 minute or NO to
keep the LCD backlight always on.
b. Accept the selected option.
2. To set the backlight brightness, press <ENTER>.
a. Select the backlight brightness (1–10), 1 being the darkest and 10 the brightest.
b. Accept the new value.
2. To select the temperature unit, press <ENTER>.
a. Select ºC to show the temperature in the Celsius scale or ºF to show the
temperature in the Fahrenheit scale.
b. Accept the selected option.
From the Main Menu, highlight Display Settings and press <ENTER>.
2. To start the built-in test sequence, press <ENTER>.
The automatic fixture test will end after 1 full cycle. You can stop the test by
pressing <MENU>.
2. Highlight the desired attribute.
3. To change the value of the selected attribute, press <ENTER>.
a. Set the attribute value (000–255).
b. Accept the new value.
4. Repeat steps 2 and 3 for the other attributes.
5. When done with the test, exit to the previous menu
(the values of all tested channels will go back to zero).
From the Main Menu, highlight Fixture Information and press <ENTER>.
Highlight Fixture Use Time (the accumulated product's operation time will show).
You cannot modify or reset the fixture operation timer.
2. To reset the lamp operation timer, press <ENTER>.
a. Select Reset Time to reset the timer or Exit to exit without resetting.
b. Accept the selected option.
2. To see the firmware versions installed, press <ENTER>.
a. The display will show the current firmware version for each of the four CPU
boards (A through D) in the product.
b. Return to the previous menu.
Operation
-17-