Table of Contents
Advertisement
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
Before deciding on a location for the product, make sure there is easy access to the product for
maintenance and programming purposes.
•
Make sure that the structure onto which the product is being mounted can support the product's
weight. See the
Technical Specifications
•
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
Procedure
The onAir IP Panel 1 comes with an omega bracket and a junior pin. Mounting clamps are sold separately.
Make sure the clamps are capable of supporting the weight of this product. Use at least two mounting
points per product. For the Chauvet Professional line of mounting clamps, go to
http://www.trusst.com/products.
Mounting Diagram
Mounting clamp
10
for weight information.
Omega bracket
Safety cable
Junior pin screw
onAir IP Panel 1 User Manual Rev. 3
Setup
Junior pin
Advertisement
Table of Contents
