Interface Group Configuration; Interface Grouping - ZyXEL Communications XMG3512-B10A User Manual

Click
Ne two rk Se tting > Inte rfa c e G ro uping
Network Setting > Interface Grouping
Fig ure 99
The following table describes the fields in this screen.
Table 73 Network Setting > Interface Grouping
L ABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Criteria
Modify
14.2.1 Inte rfa c e G ro up C o nfig ura tio n
Click the
Add Ne w Inte rfa c e G ro up
screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Chapter 14 Interface Grouping
DESC RIPT IO N
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the icon to remove the group.
De le te
button in the
XMG3512-B10A User's Guide
to open the following screen.
Inte rfa c e G ro uping
172
screen to open the following