Factory Default Transparent Mode Network Configuration - Fortinet Switch 800F Installation Manual

Factory default Transparent mode network configuration

Factory default Transparent mode network configuration
20
Table 3: Factory default NAT/Route mode network configuration (Continued)
HA interface
Port 1
Port 2
Port 3
Port 4
Network Settings
In Transparent mode, the FortiGate unit has the default network configuration listed in
Table 4.
Table 4: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
01-28006-0024-20041026
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Default Gateway (for default route)
Interface connected to external network
(for default route)
Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and to the external network.
Primary DNS Server
Secondary DNS Server
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Getting started
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
192.168.100.1
external
207.192.200.1
207.192.200.129
admin
(none)
10.10.10.1
255.255.255.0
207.194.200.1
207.194.200.129
Fortinet Inc.