Table of Contents
Advertisement
Transparent mode installation
FortiGate-800/800F Installation Guide
There are 4 10/100 Base-TX connectors on the FortiGate-800:
•
user-defined interfaces 1 to 4 for connecting up to four additional networks to the
FortiGate unit.
FortiGate-800F
There are 4 LC-SFP 1000Base-SX fiber transceivers on the FortiGate-800F:
•
Internal for connecting to the internal network,
•
External for connecting to your public switch or router and the Internet,
•
DMZ for connecting to a DMZ network,
•
HA for connecting to another FortiGate-800F for high availability (see
availability installation" on page
There are 4 10/100 Base-TX connectors on the FortiGate-800F:
•
user-defined interfaces 1 to 4 for connecting up to four additional networks to the
FortiGate unit.
To connect the FortiGate-800/800F unit running in Transparent mode:
1
Connect the Internal interface to the hub or switch connected to your internal network.
2
Connect the External interface to the network segment connected to the external
firewall or router.
3
Optionally connect the DMZ and HA interfaces and interfaces 1 to 4 to hubs or
switches connected to your other networks.
51),
01-28006-0024-20041026
Reconnecting to the web-based manager
"High
47
Advertisement
Table of Contents
