Next Steps - Fortinet Switch 800F Installation Manual

Reconnecting to the web-based manager

Next steps

48
Figure 12: FortiGate-800/800F Transparent mode connections
Internal Network
Hub or Switch
Internal
Esc Enter
P W R
8
FortiGate-800
Public Switch
or Router
Internet
You can use the following information to configure FortiGate system time, to register
the FortiGate unit, and to configure antivirus and attack definition updates.
Refer to the FortiGate Administration Guide for complete information on configuring,
monitoring, and maintaining your FortiGate unit.
To set the date and time
For effective scheduling and logging, the FortiGate system date and time must be
accurate. You can either manually set the system date and time or configure the
FortiGate unit to automatically keep its time correct by synchronizing with a Network
Time Protocol (NTP) server.
1 Go to System > Config > Time.
2 Select Refresh to display the current FortiGate system date and time.
3 Select your Time Zone from the list.
4 Optionally, select Automatically adjust clock for daylight saving changes check box.
D M Z
I N T E R N A L E X T E R N A L D M Z HA 1 2 3 4 CONSOLE USB
Interface 4
External
01-28006-0024-20041026
Transparent mode installation
Other Network
Other Network
Fortinet Inc.