Fortinet Switch 800F Installation Manual page 32

Configuring the FortiGate unit to operate in NAT/Route mode
32
config system admin
edit admin
set password <psswrd>
end
To configure interfaces
1 Log in to the CLI.
2 Set the IP address and netmask of the internal interface to the internal IP address and
netmask that you recorded in
config system interface
edit internal
set mode static
set ip <address_ip> <netmask>
end
Example
config system interface
edit internal
set mode static
set ip <192.168.120.99> <255.255.255.0>
end
3 Set the IP address and netmask of the external interface to the external IP address
and netmask that you recorded in
Table 6 on page
Table 6 on page
01-28006-0024-20041026
NAT/Route mode installation
28. Enter:
28.
Fortinet Inc.