Table of Contents
Advertisement
Turning the FortiGate unit power on and off
Connecting to the web-based manager
16
Table 1: FortiGate-800 LED indicators
LED
Power
Internal
External
DMZ
HA
1 to 4
Table 2: FortiGate-800F LED indicators
LED
Power
Internal
External
DMZ
HA
To power off the FortiGate unit
Always shut down the FortiGate operating system properly before turning off the
power switch.
1
From the web-based manager, go to System > Maintenance > ShutDown, select
Shut Down and select Apply, or from the CLI, enter:
execute shutdown
2
Turn off the power switch.
3
Disconnect the power cable from the power supply.
Use the following procedure to connect to the web-based manager for the first time.
Configuration changes made with the web-based manager are effective immediately
without resetting the firewall or interrupting service.
State
Description
Green
The FortiGate unit is powered on.
Off
The FortiGate unit is powered off.
Amber
The correct cable is in use and the connected equipment has
power.
Flashing
Network activity at this interface.
amber
Green
The interface is connected. Internal, External, DMZ and HA
connect at up to 1000 Mbps. Interfaces 1, 2, 3 and 4 connect at
up to 100 Mbps.
Off
No link established.
State
Description
Green
The FortiGate-800F unit is powered on.
Off
The FortiGate-800F unit is powered off.
Amber
The correct cable is in use and the connected equipment has
power.
Flashing
Network activity at this interface.
Amber
Off
No link established.
01-28006-0024-20041026
Getting started
Fortinet Inc.
Advertisement
Table of Contents
