Conferenced Event - Panasonic Selection 470 Programmer's Manual

Section 470 - TSAPI Programmer's Guide
Service Parameters:

Conferenced Event

Function: CSTAConferencedEvent
Direction: C ← S
Functional Description:
The Conferenced Event Report is generated for the following circumstances:
• When DBS extension completes a conference by pressing the "conference" button.
• When an application processor successfully completes a cstaConferenceCall request.
• When busy override is successfully activated.
Service Parameters:
DBS-92-470
monitorCrossRefID
clearedCall
localConnectionInfo
cause
The Conference Event Report indicates that two calls are conferenced (merged) into one,
and no parties are removed from the resulting call in the process. The event may include
up to four parties on the resulting call.
monitorCrossRefID
Issued April 2000
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the callID of the call which has been
cleared.
[optional - supported] always specifies a null state
(CS_NULL).
[optional - supported] specifiesthe cause of the call
termination. This cause is always set to EC_NONE.
[mandatory] contains the handle to the monitor request for
which this event is reported.
27