Viewing The Event Log; View Event Log - Panasonic K10059 User Manual

SecurityPhone.book 38 ページ ２００４年７月２１日 水曜日 午後６時５８分

Viewing the Event Log

The phone can record up to 100 events in a log. Event log is sorted by the most
recent to the oldest. When the 101
Refer to "Event Logging Procedures" on pages 37 to 38 in the 3000EN Security
Systems User's Guide.
Base Unit
1 Press [ADT].
2 Scroll to "OTHER FUNCTIONS" by pressing [d]
or [B], then press [g].
3 Scroll to "VIEW EVENT LOG" by pressing [d]
or [B], then press [g].
Enter your security code.
4
• To display the previous event, press [*].
To display the following event, press [#].
• If you press [#] at the latest event, the phone will
go back to the step 2.
• The number after "E" is the event log code.
(Example, "403" means "Schedule Arm/Disarm
AWAY".) For further information, see "Table of
Event Log Codes" on page 38 in the 3000EN
Security Systems User's Guide.
• If you entered the wrong security code, the phone
will go back to step 2. Try again from step 2.
• To exit the menu, wait for 30 seconds.
Press [STOP] to go to the standby mode.
5
Handset
: Press the soft key (
the cordless handset. Press [OFF] to go to the standby mode.
• When finished, press [0] to [9], or wait for 30 seconds. Then press [OFF] or
[STOP] to exit the menu.
38
st event is recorded, the oldest one is deleted.
g
g
ENTER CODE
Example
005 E403 U000 P1
12:35AM 05/15/04
), and follow steps 2 to 4 above, using
ADT
OTHER FUNCTIONS

VIEW EVENT LOG

----