Diverted Event - Panasonic Selection 470 Programmer's Manual

Diverted Event

Function: CSTADivertedEvent
Direction: C ← S
Functional Description
The Diverted Event Report is sent to notify the client application that event reports for a call
will no longer be provided. This event report is sent to a cstaMonitorDevice monitored
station when a call leaves the station, without the call having been dropped/disconnected.
Examples of this are call forwarding and call pickup.
Service Parameters:
30
calledDevice
lastRedirectionDevice
localConnectionInfo
cause
The Diverted Event Report indicates that a call has been deflected or diverted from a mon-
itored device. It indicates that the call is no longer present at the device.
monitorCrossRefID
connection
divertingDevice
newDestination
localConnectionInfo
cause
Issued April 2000
Section 470 - TSAPI Programmer's Guide
able.
[optional - partially supported] specifies the originally called
device. In the case of diverted calls, this value is supplied.
[optional - not supported] specifies the previously alerted
device in case where the call was redirected or diverted to the
alertingDevice.
[optional - supported] specifies the connection state of the
monitored device for this call. A CS_NONE means the local
connection state is unknown.
[optional - supported] specifies the reason for this event.
[mandatory] contains the handle to the monitor request for
which this event is reported.
[mandatory] specifies the connection which was alerting.
[optional - supported] specifies the device from which the call
was diverted.
[optional - supported] specifies the device to which the call
was diverted.
[optional - supported] specifies the connection state of the
monitored device for this call.
[optional - supported] specifies the reason for this event.
DBS-92-470