Ospf Host Route Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Network Mask
LSDB Type
Advertise
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.

OSPF Host Route Settings

This window is used to configure OSPF host route settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Host Route Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Host Address
Metric
Area ID
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPF Default Information Originate Settings
This window is used to configure the OSPF Default Information Originate settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Default Information Originate
Settings, as shown below:
Enter the network mask that uniquely identifies the network that corresponds to the OSPF
Area.
Use the drop-down menu to select the type of address aggregation. Options to choose
from are NSSA Ext and Summary.
Use the drop-down menu to enable or disable the advertisement trigger.
Figure 6-50 OSPF Host Route Settings window
Description
Enter the host's IP address used.
Enter a metric between 1 and 65535, which will be advertised.
Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
Figure 6-51 OSPF Default Information Originate Settings window
230