Compound Authentication; Compound Authentication Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Complete the JWAC authentication information on this window to set the JWAC page settings. Enter a name for
the Authentication in the first field and then click the Apply button. Next, enter a User Name and a Password and
then click the Enter button.

Compound Authentication

Compound Authentication settings allows for multiple authentication to be supported on the Switch.

Compound Authentication Settings

This window is used to configure Authorization Network State Settings and compound authentication methods for a
port or ports on the Switch.
To view this window, click Security > Compound Authentication > Compound Authentication Settings as
shown below:
The fields that can be configured are described below:
Parameter
Authorization Attributes
State
Figure 9-48 Compound Authentication Settings window
Description
Click the radio buttons to enable of disable the Authorization Attributes State.
425