Igmp Group Table - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Interface Name
Click the Find button to find the interface entered.
Click the View All button to view all the interfaces configured on this switch.
Click the Edit button to re-configure the selected entry.

IGMP Group Table

The window is used to display the IGMP static groups on the Switch.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Group Table,
as shown below:
The fields that can be configured are described below:
Parameter
Interface Name
Multicast Group
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to view all the interfaces configured on this switch.
Click the View Detail link to view more information regarding the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the View Detail link to see the following window.
Description
Enter the IP interface name used for this configuration.
Figure 6-93 IGMP Group Table window
Description
Enter the IP interface name used for this configuration.
Enter the multicast group IP address.
Figure 6-94 IGMP Group Detail Information window
252