Connecting To The Dvr From Inside; Connecting To The Dvr From Outside; Logging In To The Web Viewer - Honeywell HREP24 User Manual

136 | Performance Series HREP2 DVR User Guide

Connecting to the DVR from Inside

•
•

Connecting to the DVR from Outside

Using the IP Address
•
•
Using the URL
•
•

Logging in to the Web Viewer

1.
www.honeywell.com/security
Check the Network Status and verify the IP ADDRESS and WEB SERVICE PORT of the
DVR (see Network Status on page 80
Enter the IP address and web service port in the address bar of the browser.
For example: http://192.168.1.200:8080
Figure 9-1 DVR URL in the Address Bar
Check the Network Status and verify the EXTERNAL IP ADDRESS and WEB SERVICE
PORT of the DVR (see Network Status on page 80
If using a fixed (external) IP, enter the external IP that is specified in the DVR in the address
bar of the web browser.
For example: If the internal IP address is set to http://222.112.4.48:8080
(192.xxx.xxx.xxx), no access from outside is allowed.
Check the Network Status and verify the DDNS ADDRESS and WEB SERVICE PORT of
the DVR (see Network Status on page 80
Enter the DDNS address and web service port in the address bar of the browser.
For example: http://00115f123456.DVRLINK.NET:8080
Note In a router network, you have to set the Port Forwarding and DMZ Setting to allow
access from outside.
Note For the necessary settings of the router, refer to the router's user manual or
contact the router's manufacturer.
Provide the user ID and password (see
Note The default User name is ADMIN; the default Password is 1234.
for more information).
for more information).
for more information).
Figure 9-2).