Panic Recording Settings; Network Streaming Settings - Honeywell HREP24 User Manual

112 | Performance Series HREP2 DVR User Guide
4.
5.

Panic Recording Settings

In panic recording mode, you can specify the recording resolution and quality of the video.
1.
2.
3.
4.

Network Streaming Settings

You can specify the maximum size of network streaming for remote users and set the FPS
(frames per second).
www.honeywell.com/security
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From the RECORDING menu, select PANIC RECORDING (see
Figure 5-8 Panic Recording Settings
Set each item of RESOLUTION, FPS, QUALITY and use of the AUDIO for the panic
recording.
Note The SIZE/FPS/QUALITY setup is performed the same as was described
in the Continuous Recording Settings
For more information on setting resolution, FPS and quality, see
Size/FPS/Quality Settings on page
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Figure
section (page 108).
108.
5-8).