Table of Contents
Advertisement
Figure 2-6
Network Connection Overview
Camera
Local PC
1.
Connect the WAN(UPLINK) port in the rear panel to the router or hub (see
CAUTION
The LAN (DOWN LINK) port is provided only for
connecting to the dedicated backup network device. (Do not connect
devices to this port.)
2.
Connect the local PC to the router or hub (see
Figure 2-7
Connecting Router or Hub to the DVR
Local PC
3.
Enter the address in the Web browser of your PC in the format of: http://IP address:Web
service port (for example: http://192.168.0.23:8080). The web service port is set
to 8080 by default. From the Network Setup screen, you can change the port number.
4.
Provide the ID and password before logging in. Then, you can view the monitoring screen.
Access ID (factory default): ADMIN
Password: 1234
Broadband
router or hub
Local PC
Figure
2-7).
Local PC
Installation | 39
Figure
2-7).
Broadband
router or hub
800-15802 - A - 12/2013
Advertisement
Table of Contents
