Covert Setting; Motion Setting - Honeywell HREP24 User Manual

Note You can enter up to 9 alphanumeric characters for the camera title.

Covert Setting

You can set to hide the video of a specific camera from a specific user (see
hide the camera video so that a specific user or user group can not view. To change the covert
settings from user group to user, move to the USER menu and make necessary changes. When
finished, click APPLY to apply the changes.
Figure 9-16 Web Viewer Covert Setup

Motion Setting

Specify the use of motion detection and reaction for each channel and set also the
daytime/nighttime options (see
Select a channel. Set the mask area and activation and specify the daytime range.
When finished, click APPLY to apply the changes.
Note For more information about how to set the motion area, refer to
Area on page
Figure 9-17).
60.
Web Viewer | 147
Figure 9-16). Set to
Setting the Motion
800-15802 - A - 12/2013