Alarm Recording Settings - Honeywell HREP24 User Manual

4.
5.

Alarm Recording Settings

Specify the recording quality of the alarm event if it occurs and make a schedule for that
recording.
1.
2.
3.
Note The SIZE/FPS/QUALITY and SCHEDULE setup is performed the same as
was described in the
For more information on setting resolution, FPS and quality, see
Size/FPS/Quality Settings on page
a motion recording schedule, see
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From the RECORDING menu, select ALARM RECORDING (see
Figure 5-7 Alarm Recording Settings
   
Use the , , , and
SIZE/FPS/QUALITY or SCHEDULE.
Set each item of RESOLUTION, FPS, QUALITY and use of the AUDIO for the alarm
recording.
Note The SIZE/FPS/QUALITY and SCHEDULE setup is performed the same as
was described in the
For more information on setting resolution, FPS and quality, see
Size/FPS/Quality Settings on page
a alarm recording schedule, see
Continuous Recording Settings
108. For more information on setting
Schedule Setting on page
buttons on the remote control or use the mouse to select either
Continuous Recording Settings
108. For more information on setting
Schedule Setting on page
Recording Setup | 111
section (page 108).
109.
Figure 5-7).
section (page 108).
109.
800-15802 - A - 12/2013