Table of Contents
Advertisement
62 | Performance Series HREP2 DVR User Guide
3.
4.
Tamper Detection
You can set the DVR to detect tampering (attempt to interfere monitoring operations by
tampering with an installed camera).
1.
2.
3.
www.honeywell.com/security
Figure 4-8
PTZ Camera Setup Screen
To apply the change, click APPLY at the bottom of the screen.
When the setup is completed, press EXIT on the remote control or click CLOSE at the
bottom of the screen to display a confirmation dialog.
Click CANCEL to return to the previous menu.
From SYSTEM SETUP
Use the
, and ENTER buttons on the remote control or mouse to select the
,
,
,
ACTIVATION drop-down list for the camera to turn tamper detection for that camera ON
or OFF.
Use the
, and ENTER buttons on the remote control or mouse to select the
,
,
,
MARK drop-down list for the camera to program tamper detection for.
MARK turns the detection indicator to be displayed onscreen ON or OFF.
CAMERA, select TAMPER DETECTION (see
Figure
4-9).
Advertisement
Table of Contents
