Using Platen Glass - Konica Minolta 7222 User Manual

Making Double-Sided Copies (1 2, 2 2) (continued)

Using Platen Glass

Use the platen glass to scan originals unsuitable for the document feeder.
Specification for Double-Sided Copying Using Platen Glass
❒ Use the Platen store mode.
❒ See p. 10-7 for the information on unsuitable RADF originals.
❒ Incompatible Conditions: Using RADF, Non-Standard Size, Transparency Interleave,
Image Insert
1.
Open the document feeder.
The RADF indication on the Basic Screen will disappear and the 1-2 and 2-2 keys will be
dimmed to show inactivity.
2.
Position original FACE DOWN on the platen glass.
Be sure to start from the first page.
3.
Touch 1 2 on the Basic Screen to highlight it.
The STORE key will be highlighted automatically.
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
6.
Press [START] to scan.
The front side image of the double-sided copy will be scanned into memory.
3-20
• See p. 10-7 for original sizes detectable on the platen glass.
• See p. 3-5 to p. 3-6 for details on positioning originals.
DO NOT press [AUTO RESET] at this point, otherwise the selected mode will
be released and the copier cannot scan the original placed on the glass.
Some incompatible conditions may automatically release the selected copy
mode. In this case, arrange settings so that they are compatible with the
selected copy mode.
See p. 3-7 for details on setting print quantity.