Repeating Selected Image Area (Repeat: Vert./Horiz. Mode) - Konica Minolta 7222 User Manual

Repeating Selected Image Area (Repeat: Vert./Horiz. Mode)

Use this function to repeat the selected image area of 10 mm ~ 150 mm in both vertical
and horizontal widths measured from the rear left corner of the 11"x17" original area
indicated on the left edge of the platen glass.
Vertical/Horizontal Width Setting Mode Specifications
❒ Use the platen glass. (RADF cannot be used.)
❒ Incompatible Conditions: Using RADF, 2-2, 2-1, APS, AMS, Sort, Staple, Punch,
Group, Rotation Sort, Rotation Group, Mixed Original, Folded Original, Non-Standard
Size, Sheet/Cover Insertion, Chapter, Combination, Booklet, Transparency Interleave,
Image Insert, Book Copy, Upside Down, Non-Image Area Erase, Frame/Fold Erasure,
AUTO Layout, Image Shift, Stamp, Overlay
Horizontal width
1.
Touch APPLICATION on the Basic Screen.
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Vertical/Horizontal Width Setting mode
Vertical
width
Repeat copy
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Image Insert
Book Copy
Upside Down
Non-Image
Area Erase
Reverse
Image
Repeat
Frame/Fold
Erasure
AUTO
Layout
9
Applications
Image Shift
Reduce &
Shift
Stamp
Overlay
9-31