Positioning originals in Mixed original mode
Mixed size originals can be copied together from the document feeder.
To use the Mixed original mode, see procedure on p. 8-4 to p. 8-5.
1.
Arrange originals in order.
Arrange the mixed size originals as illustrated below.
• Before placing originals in the tray, be sure the document feeder is fully
• Be sure not to use unsuitable RADF originals. See p. 10-7 for details.
See p. 10-8 for allowable combinations of mixed originals.
2.
Position mixed originals FACE UP, aligned with the left rear side of the
document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
3.
Adjust paper guides.
To the
To the left
depth
Setting
direction
closed. Once closed, do not open the document feeder, otherwise the
selected copy conditions may be altered automatically.
Positioning Originals (continued)
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold/
Fold&Stitch
Output with
Inner Tray
3-3