Mld Proxy (Ri Mode Only) - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
Parameter
Unit
From Port / To Port
State
IGMP Query
DVMRP
PIM
All
Click the Apply button to accept the changes made.

MLD Proxy (RI Mode Only)

MLD proxy plays the host role on the upstream interface. It will send MLD report packet to the router port. MLD
proxy plays the router role on the downstream interfaces. It reduces the number of the MLD control packets
transmitted to the core network.
MLD Proxy Settings
Users can configure the MLD proxy state and MLD proxy upstream interface in this page.
To view the following window, click L2 Features > L2 Multicast Control > MLD Proxy > MLD Proxy Settings, as
shown below:
The fields that can be configured are described below:
Parameter
MLD Proxy State
VLAN Name
VID
Source IP Address
Unsolicited Report
Interval (0-25)
Static Router Port
Dynamic Router Port
Description
Select the unit you want to configure. (EI and SI Mode Only)
Select the range of ports to be configured.
Use the drop-down menu to enable or disable the filtering function
Tick to enable or disable filtering IGMP Query protocol packets.
Tick to enable or disable filtering DVMRP protocol packets.
Tick to enable or disable filtering PIM protocol packets.
Tick to enable or disable filtering all layer 3 control packets.
Figure 4-70 MLD Proxy Settings window
Description
Here the user can enable or disable the MLD Proxy Global State.
The VLAN name for the interface.
The VID for the interface.
The Source IP of the protocol packet. If it is unspecified, the zero IP will be used.
The unsolicited report interval. It is the time between repetitions of the host's initial
report of membership in a group. Default is 10 seconds. If set to 0, it means to send
only one report packet.
Select the static router ports that will be included in the configuration.
Display a list of ports that are connected to multicast-enabled routers.
125