Mac-Based Access Control Port Settings - D-Link xStack DGS-3120 Series Reference Manual

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MAC-based Access
Control State
Method
RADIUS
Authorization
Local Authorization
Log State
Trap State
Password Type
Password
Max User (1-1000)
VLAN Name
VID (1-4094)
Member Ports
Click the Apply button to accept the changes made for each individual section.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.

MAC-based Access Control Port Settings

This window is used to display the MAC-based access control port settings.
To view this window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control Port
Settings as shown below:
Description
Toggle to globally enable or disable the MAC-based access control function on the
Switch.
Use this drop-down menu to choose the type of authentication to be used when
authentication MAC addresses on a given port. The user may choose between the
following methods:
Local – Use this method to utilize the locally set MAC address database as the
authenticator for MAC-based access control. This MAC address list can be configured
in the MAC-based access control Local Database Settings window.
RADIUS – Use this method to utilize a remote RADIUS server as the authenticator for
MAC-based access control. Remember, the MAC list must be previously set on the
RADIUS server.
Use the drop-down menu to enable or disable the use of RADIUS Authorization.
Use the drop-down menu to enable or disable the use of Local Authorization.
Use the drop-down menu to enable or disable log state.
Use the drop-down menu to enable or disable trap state.
Use the drop-down menu to select the type of RADIUS authentication password for
MAC-based access control.
Manual String – Use the same password in the Password text box.
Client MAC Address – Use the client's MAC address as the password.
Enter the password for the RADIUS server, which is to be used for packets being sent
requesting authentication. The default password is "default".
Enter the maximum amount of users of the Switch. Tick the No Limit check box to
have unlimited users.
Enter the name of the previously configured Guest VLAN being used for this function.
Click the radio button and enter a Guest VLAN ID.
Enter the list of ports that have been configured for the Guest VLAN.
344