Operation; Selecting Video Memory; Selecting An Aspect Ratio; Adjusting The Picture - Runco RS-1100 CineWide Owner's Operating Manual

• Press the MEM1 button on the remote control
to recall settings for the current input from the
"Memory 1" memory preset.
• Press ISF NIGHT to recall settings for the current input from the "ISF Night" memory
preset.
• Press ISF DAY to recall settings for the current input from the "ISF Day" memory
preset.
• Press FACT to recall the factory-default settings for the current input.
Use these buttons to select the appropriate
aspect ratio for the type of program material being
viewed. For more information on aspect ratios,
refer to Table 4-1.
• Press the BRT button on the remote control to
adjust the image brightness.
• Press CONT to adjust the image contrast.
• Press COL to adjust the image color level.
• Press TNT to adjust the hue of the image.
For more information about these controls, refer to Picture Adjustment on page 46.
When you turn on the RS-1100, it switches to the
last selected input and looks for a valid signal.
Use these buttons on the remote control to select
an input source directly.
Runco RS-1100 Series Owner's Operating Manual
ISF ISF
MEM1 FACT
NIGHT DAY
ANA
4X3 LBOX VWIDE
16X9
1 2
CINEMA VCINE
BRT CONT COL TNT
LIGHT
ON
OFF
VID S-VID COMP1 COMP2
RGBHD HDMI
43

Operation

4
4.1
Selecting Video
Memory
4.2
Selecting an Aspect
Ratio
4.3

Adjusting the Picture

4.4
Selecting An Input
Source