Runco RS-1100 CineWide Owner's Operating Manual page 23

5. Picture Adjustment Buttons:
BRT (Brightness)
Press to adjust black level.
CONT (Contrast)
Press to adjust white level.
COL (Color)
Press to adjust color intensity.
TNT (Tint)
Press to adjust color hues.
6. Memory Preset Buttons:
MEM1
Press to recall settings for the current input from the "Memory 1" memory preset.
ISF NIGHT
Press to recall settings for the current input from the "ISF Night" memory preset.
ISF DAY
Press to recall settings for the current input from the "ISF Day" memory preset.
FACT
Press to recall the factory-default settings for the current input.
7. Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
ANA 16:9 (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 display mode in the center of the screen.
LBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen.
VWIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower
portions are masked.
VCINE (CineWide-equipped projectors only)
Selects the Virtual Cinema aspect ratio, which anamorphically compresses a 2.35:1
image to fill a 16:9 image area. (The secondary anamorphic lens then "stretches" the
image back to 2.35:1.)
8. 0 - 9
Use these keys to enter menu passcodes.
Runco RS-1100 Series Owner's Operating Manual 11
Controls and Functions