Freewheel Levers - Pride Mobility JET1 Owner's Manual

Pride jet1 power chair owner's manual
Hide thumbs Also See for JET1:
Table of Contents

Advertisement

FREEWHEEL LEVERS

For your convenience, your Jet 1 is equipped with two freewheel levers. See figures 5 and 6. These levers allow
you to disengage the drive motors and maneuver the chair manually.
WARNING! Do not use your Jet 1 while the drive motors are disengaged unless you are in the
presence of an attendant! Do not disengage the drive motors when your Jet 1 is on an incline.
The chair could roll down on its own, causing injury!
To engage or disengage the freewheel feature:
1. Turn the freewheel levers inward to disengage the drive motors. See figure 5.
2. Turn the freewheel levers outward, to engage the drive motors. See figure 6.
CAUTION! It is important to remember that when your Jet 1 is in freewheel mode, the braking
system is disengaged.
If a lever is difficult to move in either direction, rock your Jet 1 back and forth slightly. The lever should then move
to the desired position.
Figure 5. Drive Disengaged
20
I V .
T H E
FREEWHEEL LEVERS
www.pridemobility.com
J E T
1
Figure 6. Drive Engaged
FREEWHEEL LEVERS
Jet 1/RevD/Jul03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents