Manual Freewheel Levers - Pride Mobility JAZZY SELECT 14 series Owner's Manual

I I I .

Manual Freewheel Levers

Your power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive
motors from the gearboxes and maneuver the chair manually.
WARNING! Do not use the power chair while the drive motors are disengaged! Do not
disengage the drive motors when the power chair is on an incline, as the unit could roll
on its own. Only engage the freewheel mode when on a level surface.
WARNING! It is important to remember that when your power chair is in freewheel
mode, the braking system is disengaged.
To engage or disengage the drive motors:
1. Locate the lever on top of each motor.
2. Turn the levers inward to engage the drive motors (drive mode). See figure 7.
3. Turn the levers outward to disengage the drive motors (freewheel mode). See figure 8.
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to
the desired position.
WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.
Figure 7. Drive Mode (Drive Engaged)
20
Y O U R P O W E R
DRIVE
FREEWHEEL
www.pridemobility.com
C H A I R
Figure 8. Freewheel Mode (Drive Disengaged)
DRIVE
FREEWHEEL
Jazzy Select 14 Series