Operation - Pride Mobility JET1 Owner's Manual

You control the speed and direction of your Jet 1 with the joystick controller.
NOTE: In an emergency situation, use the on/off button to stop the Jet 1.
To operate your Jet 1:
1. Turn it on (push the on/off button). The battery condition meter will light, indicating the present charge of your
battery.
2. Push the joystick in the direction you wish to move. The further you push the joystick from the center (neutral)
position, the faster your Jet 1 moves.
WARNING! If your power chair begins to move in an unexpected manner, immediately release the
joystick. Unless the joystick is damaged, this action should stop your power chair.
WARNING! Unless faced with an emergency situation, do not use the on/off button to stop the
power chair. This will cause the power chair to stop abruptly.
WARNING! Always turn the power off when you are stationary to prevent unexpected movement.
The Jet 1 features a Dynamic joystick controller. See figure 25. The controller translates the speed and the direc-
tional information from the joystick to the motors. It has self-diagnostic features that are designed to search for
potential problems at the rate of 100 times per second. If the controller detects a problem in the power chair’s
electrical system, the power chair may, depending on the severity of the problem, stop functioning (see “Trouble
Codes”).
SPEED AND RESPONSE
ADJUSTMENT KNOB
Jet 1/RevD/Jul03
V I I I . O P E R A T I O N
Figure 25. Dynamic Joystick Controller
www.pridemobility.com
ON/OFF BUTTON
BATTERY CONDITION
METER
29