Comfort Adjustments; Seat Height; Armrest Width Adjustment - Pride Mobility JET1 Owner's Manual

V I . C O M F O R T
After you have become familiar with your Jet 1’s
operation, you may find the need to adjust the
seat. There are some adjustments you can make
to increase your comfort such as seat height and
angle, armrest height and angle, footrest height
and angle, and joystick position.
WARNING! If your power chair
was configured at your autho-
rized Pride provider or service
center, please consult your
health care professional before
changing the seat position or
making any other adjustment.
Some adjustments may de-
grade your Jet 1’s performance
and safety by changing its cen-
ter of gravity.

SEAT HEIGHT

You can change the seat height manually.
To change the seat height:
1. Remove the seat. See VII. “Disassembly.”
2. Remove the nut and bolt from
the seat tower. See figure 14.
3. Raise or lower the seat tower to the desired
position.
4. Install the nut and bolt into the seat tower.
5. Install the seat.

ARMREST WIDTH ADJUSTMENT

To change the armrest width:
1. Locate the two setscrews on the armrest re-
ceiver bracket. See figure 15.
2. Loosen the setscrews, slide the armrests in
or out for the desired width.
3. Tighten the setscrews.
24
A D J U S T M E N T S
Figure 14. Seat Tower Nut And Bolt
Figure 15. Armrest Width
LOOSEN SETSCREWS TO MOVE ARMREST
www.pridemobility.com
NUT AND BOLT
Jet 1/RevD/Jul03