Setting The Picture Output; (Bluetooth In); Setting The Usb Adapter To On/Off; Setting The Visual Soft Button - Alpine IVA-W505 Owner's Manual

'Adustln<O";ttitt
.Ext.mart. .
r
UtAOdlq
leve
, . " ..,.1, ' " ' " ' , '
",$I.,,~~..... """.;fu,~",.",.~.R",
."''>''.''""." ."''' ""
After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
setting Item: AUX IN LEVEL
Setting contents: LOW I HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
After setting to ON in "Setting the AUX Mode", this setting can
be
carried out.
setting Item: AUX IN SIGNAL
setting contents: NTSC I PAL
• The video input type can be changed.
Outputs the picture of the source selected on the IVA-W505 connected
to the rear monitor.
setting Item: AUX OUT
setting contents: OFFION
OFF: The "RSE" item is not displayed on the SOURCE
selection screen.
ON: The "RSE" item is displayed on the SOURCE selection
screen.
Touch [RSEI to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
setting Item: BLUETOOTH IN
setting contents: OFFI NAV. I ADAPTER
OFF: Select to ignore any external interrupts.
NAV: Select when the optional portable navigation is
connected.
The TEL screen of the portable navigation is
displayed.
ADAPTER: Select when the optional Bluetooth box is connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
• The setting cannot be made when "Setting the External Device
Interrupt Mode" (page
38)
is set to ON.
• For details on Bluetooth operation. refer to the Owner's Manual of
the Bluetooth Box.
• If the Bluetooth Box compatible with the Voice Dialfunction is
connected. the Voice Dial function can be used.
If a USB Adapter is to
be
used, set to ON.
setting Item: USB ADAPTER
setting contents: OFFION
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
• If ON is set even when a CD changer is connected. the source name
on the SOURCE selection screen will changefrom CD CHG to USB.
setting Item: VISUAL KEY
setting contents: VISUAL I NAV.
VISUAL: Recalls the VISUAL selection screen by touching
[VISUAL).
NAV.: Switches directly to the navigation screen by touching
[VISUAL).
The unit's
*
(OPTION) button function can be changed.
setting Item: OPTION KEY
Setting contents: V. SEL I SATI TEL
V
SEL: Press
*
(OPTION) to recall the
V
SEL screen.
SAT: If you press
*
(OPTION) when either the XM or
SIRIUS Receiver Box is connected. the Weather or
Traffic channels will be recalled.
TEL: If you press
*
(OPTION) when the Bluetooth Box is
connected, the Bluetooth TEL screen will be recalled.
To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting Item: OPTICAL OUT
Settmgcon~nB:OFFION
• Afterwards. set ACC to OFF once. then turn it ON again. The setting
of Digital Output is decided.
An external device (such as a portable music player) can
be
connected
to the iPod Direct connector of this unit. An iPod DirectIRCA Interface
cable (optional) is required.
A portable music device and an iPod cannot
be
connected to the iPod
Direct connector at the same time.
Setting Item: AUX+ IN
Setting contents: OFFION
OFF: AUX+ source is not displayed
ON: AUX+ source is displayed
• When OFF is selected. the settings related to AUX + cannot be
changed from this unit.
• Only when an Alpine TV tuner is connected. you can operate the
displayed function guide from this unit.
After setting to ON in "Setting the AUX+ Mode", this setting can
be
carried out.
Setting Item: AUX+ LEVEL
Setting contents: LOWI HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
39-EN
'Adustln<O";ttitt
.Ext.mart. .
r
UtAOdlq
leve
, . " ..,.1, ' " ' " ' , '
",$I.,,~~..... """.;fu,~",.",.~.R",
."''>''.''""." ."''' ""
After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
setting Item: AUX IN LEVEL
Setting contents: LOW I HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
After setting to ON in "Setting the AUX Mode", this setting can
be
carried out.
setting Item: AUX IN SIGNAL
setting contents: NTSC I PAL
• The video input type can be changed.
Outputs the picture of the source selected on the IVA-W505 connected
to the rear monitor.
setting Item: AUX OUT
setting contents: OFFION
OFF: The "RSE" item is not displayed on the SOURCE
selection screen.
ON: The "RSE" item is displayed on the SOURCE selection
screen.
Touch [RSEI to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
setting Item: BLUETOOTH IN
setting contents: OFFI NAV. I ADAPTER
OFF: Select to ignore any external interrupts.
NAV: Select when the optional portable navigation is
connected.
The TEL screen of the portable navigation is
displayed.
ADAPTER: Select when the optional Bluetooth box is connected.
The TEL screen of the Bluetooth is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
• The setting cannot be made when "Setting the External Device
Interrupt Mode" (page
38)
is set to ON.
• For details on Bluetooth operation. refer to the Owner's Manual of
the Bluetooth Box.
• If the Bluetooth Box compatible with the Voice Dialfunction is
connected. the Voice Dial function can be used.
If a USB Adapter is to
be
used, set to ON.
setting Item: USB ADAPTER
setting contents: OFFION
OFF: Does not display the USB source name on the SOURCE
selection screen.
ON: Displays the USB source name on the SOURCE selection
screen.
• If ON is set even when a CD changer is connected. the source name
on the SOURCE selection screen will changefrom CD CHG to USB.
setting Item: VISUAL KEY
setting contents: VISUAL I NAV.
VISUAL: Recalls the VISUAL selection screen by touching
[VISUAL).
NAV.: Switches directly to the navigation screen by touching
[VISUAL).
The unit's
*
(OPTION) button function can be changed.
setting Item: OPTION KEY
Setting contents: V. SEL I SATI TEL
V
SEL: Press
*
(OPTION) to recall the
V
SEL screen.
SAT: If you press
*
(OPTION) when either the XM or
SIRIUS Receiver Box is connected. the Weather or
Traffic channels will be recalled.
TEL: If you press
*
(OPTION) when the Bluetooth Box is
connected, the Bluetooth TEL screen will be recalled.
To connect an audio processor using the optical digital output, set to
"ON" by the following procedure.
Setting Item: OPTICAL OUT
Settmgcon~nB:OFFION
• Afterwards. set ACC to OFF once. then turn it ON again. The setting
of Digital Output is decided.
An external device (such as a portable music player) can
be
connected
to the iPod Direct connector of this unit. An iPod DirectIRCA Interface
cable (optional) is required.
A portable music device and an iPod cannot
be
connected to the iPod
Direct connector at the same time.
Setting Item: AUX+ IN
Setting contents: OFFION
OFF: AUX+ source is not displayed
ON: AUX+ source is displayed
• When OFF is selected. the settings related to AUX + cannot be
changed from this unit.
• Only when an Alpine TV tuner is connected. you can operate the
displayed function guide from this unit.
After setting to ON in "Setting the AUX+ Mode", this setting can
be
carried out.
Setting Item: AUX+ LEVEL
Setting contents: LOWI HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
39-EN