System Example - Alpine IVA-W505 Owner's Manual

System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and
changer.
NVE·N852A1NVE-N871 AlNVE·N872A
Navigation system
li - -
(Sold separately)
Optical Digital Cable (KWE-610A)
@
Fiber optic digital Input
terminal (for head unit)
Audio Processor (AI-NET)
(Fiber Optic Digital
compatible) (Sold
separately)
® ®
®
®
o
<IJ
@
Dill
NORM EQlOIV
Fiber optic digital
Input terminal (for
DVD Player)
®
Fiber
optic
cable
@
AI-NET
cable
Fiber optic digital
Input terminal (for
Changer)
®
·Flber optic cable
®
REMOTE OUT
@
REMOTE IN
(Yellow)
CD Changer
(AI-NET)
(Sold separately)
AI-NET cable
·Only connect fiber optic digital compatible CD Changer
DVD Video Player
(AI-NET)
(DVA-5210 etc.)
(Sold separately)
(White/Brown)
®
Ai-NET cable
(WhitelBrown)
• When the fiber optic compatible product is connected, it is necessary to set the mode ofthis unit. Refer to "Setting the Digital Output" (page 39)
and set to ON.
• When the NVA-N75IAS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately).
Please observe the following when using Fiber Optic Cable (Optical Digital Cable).
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top ofthe Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
90-EN
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), Navigation system, DVD player and
changer.
NVE·N852A1NVE-N871 AlNVE·N872A
Navigation system
li - -
(Sold separately)
Optical Digital Cable (KWE-610A)
@
Fiber optic digital Input
terminal (for head unit)
Audio Processor (AI-NET)
(Fiber Optic Digital
compatible) (Sold
separately)
® ®
®
®
o
<IJ
@
Dill
NORM EQlOIV
Fiber optic digital
Input terminal (for
DVD Player)
®
Fiber
optic
cable
@
AI-NET
cable
Fiber optic digital
Input terminal (for
Changer)
®
·Flber optic cable
®
REMOTE OUT
@
REMOTE IN
(Yellow)
CD Changer
(AI-NET)
(Sold separately)
AI-NET cable
·Only connect fiber optic digital compatible CD Changer
DVD Video Player
(AI-NET)
(DVA-5210 etc.)
(Sold separately)
(White/Brown)
®
Ai-NET cable
(WhitelBrown)
• When the fiber optic compatible product is connected, it is necessary to set the mode ofthis unit. Refer to "Setting the Digital Output" (page 39)
and set to ON.
• When the NVA-N75IAS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately).
Please observe the following when using Fiber Optic Cable (Optical Digital Cable).
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top ofthe Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
90-EN