Table of Contents
Advertisement
If
an Alpine Ai-NET Auxiliary Input Adapter (KCA-8OI B) is
connected to the IVA-W505, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CO
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801 B, see your authorized Alpine dealer.
setting Item: IN INT. MUTE
setting contents: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise. a separate switch needs to be added to switch it manually.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
setting Item: IN INT. ICON
Setting contents: INT / TEL
INT:
The INT icon appears on the display.
TEL:
When the external device (telephone) sends the interrupt
signal. the telephone icon appears on the display.
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
setting Item: REMOTE SENSOR
Settmgcon~nB:FRONT/REAR
FRONT:
The remote sensor of this unit is effective.
REAR:
The remote sensor of the external monitor
connected to AUX OUT of this unil becomes
effective. The remote control operales the
source connected to the AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor.
If
the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched. the
command is executed regardless ofthe remote control sensor switch
setting. Note. however, that the remote control sensor that has been
set takes priority
if
it has been
5
seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected. and the
remote control sensor is set to REAR. some soft button operations
([. J
STOP, etc.) cannot be peiformed. In this case. set the remote
control sensor to FRONT.
38-EN
With a rear camera connected, rear view video is output to the monitor.
Setting Item: CAMERA IN
Settmgcon~nB:OFF/ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON:
Even if the shift lever is not set to reverse (R). the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R). the rear pictures are output.
Thisfunction is effective when the reverse wire is properly connected.
• To apply the setting. set to VISUAL "Setting the VISUAL Soft Button"
(page 39).
When you connect an optional navigation equipment, set it to ON.
Setting Item: NAV. IN
Settmgcon~nB:OFF/ON
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON:
Navigation source is displayed.
With an Alpine navigation system connected to the IVA-W505, the
voice guidance of the navigation system will be mixed with the radio or
COplay.
Setting item: NAV. MIX
setting contents: OFF/ON
OFF: The navigation interruption mode is turned off.
ON:
The navigation interruption mode is on.
See "Adjusting NAV. MIX Level" under "Adjusting the Audio" on
page 26 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcement finishes. the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume.
If
a navigation announcement
cuts in while adjusting the audio level. it always resets to the current
level regardless ofthe audio level setting.
• This setting is effective when NAY. IN ofSYSTEM list screen is ON.
Setting item: AUX IN
Setting contents: OFF / ON / OVO / GAME / TV / EXT. OVO / NAV.
OFF: AUX source is not displayed.
ON:
AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM setup. although the AUX name can be
changed. it is not displayed on the source selection screen.
• When OFF is selected. the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead ofAUX source name.
Select SOURCE to switch to the guide function ofeach mode.
• Only when an Alpine TV tuner is connected. you can operate the
displayed function guide from this unit.
If
an Alpine Ai-NET Auxiliary Input Adapter (KCA-8OI B) is
connected to the IVA-W505, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CO
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801 B, see your authorized Alpine dealer.
setting Item: IN INT. MUTE
setting contents: OFF / ON
OFF: The volume level can be adjusted in Interrupt mode.
ON:
Sound will not be output. The icon that is set in "Setting
the Interrupt Icon Display" is displayed.
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise. a separate switch needs to be added to switch it manually.
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
setting Item: IN INT. ICON
Setting contents: INT / TEL
INT:
The INT icon appears on the display.
TEL:
When the external device (telephone) sends the interrupt
signal. the telephone icon appears on the display.
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
setting Item: REMOTE SENSOR
Settmgcon~nB:FRONT/REAR
FRONT:
The remote sensor of this unit is effective.
REAR:
The remote sensor of the external monitor
connected to AUX OUT of this unil becomes
effective. The remote control operales the
source connected to the AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor.
If
the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched. the
command is executed regardless ofthe remote control sensor switch
setting. Note. however, that the remote control sensor that has been
set takes priority
if
it has been
5
seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected. and the
remote control sensor is set to REAR. some soft button operations
([. J
STOP, etc.) cannot be peiformed. In this case. set the remote
control sensor to FRONT.
38-EN
With a rear camera connected, rear view video is output to the monitor.
Setting Item: CAMERA IN
Settmgcon~nB:OFF/ON
OFF: The CAMERA source is not displayed on the VISUAL
selection screen.
ON:
Even if the shift lever is not set to reverse (R). the rear
pictures are output by selecting the CAMERA source.
• By shifting to reverse (R). the rear pictures are output.
Thisfunction is effective when the reverse wire is properly connected.
• To apply the setting. set to VISUAL "Setting the VISUAL Soft Button"
(page 39).
When you connect an optional navigation equipment, set it to ON.
Setting Item: NAV. IN
Settmgcon~nB:OFF/ON
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON:
Navigation source is displayed.
With an Alpine navigation system connected to the IVA-W505, the
voice guidance of the navigation system will be mixed with the radio or
COplay.
Setting item: NAV. MIX
setting contents: OFF/ON
OFF: The navigation interruption mode is turned off.
ON:
The navigation interruption mode is on.
See "Adjusting NAV. MIX Level" under "Adjusting the Audio" on
page 26 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcement finishes. the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume.
If
a navigation announcement
cuts in while adjusting the audio level. it always resets to the current
level regardless ofthe audio level setting.
• This setting is effective when NAY. IN ofSYSTEM list screen is ON.
Setting item: AUX IN
Setting contents: OFF / ON / OVO / GAME / TV / EXT. OVO / NAV.
OFF: AUX source is not displayed.
ON:
AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM setup. although the AUX name can be
changed. it is not displayed on the source selection screen.
• When OFF is selected. the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead ofAUX source name.
Select SOURCE to switch to the guide function ofeach mode.
• Only when an Alpine TV tuner is connected. you can operate the
displayed function guide from this unit.
- Quick Links:
- (Bluetooth In)
- Installation
- Connections
Hide quick links:
Advertisement
Table of Contents
