Operator Information Panel - IBM x3630 M4 Type 7158 Installation And User Manual

4 simple-swap hard-disk drive configuration with optical drive:
4 simple-swap hard-disk drive configuration with tape drive:
USB connectors: Connect a USB device, such as USB mouse or keyboard to
either of these connectors.
Hard disk drive activity LED (front panel): When this LED is flashing, it indicates
that the drive is in use. This function is reserved for simple-swap models. For
existing models, please see the hot-swap hard disk drive activity and status LEDs
(green and yellow) that pass from the backplane as the indicators for any activity or
warning.
Hard disk drive status LED (yellow): This yellow LED is used on hot-swap
SAS/SATA hard disk drives. Each hot-swap hard disk drive has a status LED. When
this LED is lit, it indicates that the drive has failed. When this LED is flashing slowly
(one flash per second), it indicates that the drive is being rebuilt as part of a RAID
configuration. When the LED is flashing rapidly (three flashes per second), it
indicates that the controller is identifying the drive.
Operator information panel: This panel contains the power control button and
light-emitting diodes (LEDs).
Optional DVD-eject button: Press this button to release a CD or DVD from the
optional DVD drive.
Optional DVD drive activity LED: When this LED is lit, it indicates that the
optional DVD drive is in use.

Operator information panel

Note: Based on the server configuration, the operator information panel may be
located in the media cage or on the side of the server.
14
System x3630 M4 Type 7158: Installation and User's Guide