Table of Contents
Advertisement
v IBM Advanced Settings Utility (ASU) program
Using the ServerGuide Setup and Installation CD
The ServerGuide Setup and Installation CD provides software setup tools and
installation tools that are designed for your server. The ServerGuide program
detects the server model and hardware options that are installed and uses that
information during setup to configure the hardware. The ServerGuide program
simplifies operating-system installations by providing updated device drivers and, in
some cases, installing them automatically. To download the CD, go to
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=SERV-GUIDE and click
IBM Service and Support Site.
The ServerGuide program has the following features:
v An easy-to-use interface
v Diskette-free setup, and configuration programs that are based on detected
v ServeRAID Manager program, which configures your ServeRAID adapter
v Device drivers that are provided for your server model and detected hardware
v Operating-system partition size and file-system type that are selectable during
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
ServerGuide features
Features and functions can vary slightly with different versions of the ServerGuide
program. To learn more about the version that you have, start the ServerGuide
Setup and Installation CD and view the online overview. Not all features are
supported on all server models.
The ServerGuide program requires a supported IBM server with an enabled
startable (bootable) CD drive. In addition to the ServerGuide Setup and Installation
CD, you must have your operating-system CD to install the operating system.
The ServerGuide program performs the following tasks:
v Sets system date and time
v Detects the RAID adapter or controller and runs the SAS/SATA RAID
v Checks the microcode (firmware) levels of a ServeRAID adapter and determines
v Detects installed hardware options and provides updated device drivers for most
v Provides diskette-free installation for supported Windows operating systems
v Includes an online readme file with links to tips for your hardware and
For information about configuring RAID arrays, see "Configuring RAID arrays" on
page 110.
Use this program as an alternative to the Setup utility for modifying UEFI
settings. Use the ASU program online or out of band to modify UEFI settings
from the command line without the need to restart the server to access the Setup
utility. For more information about using this program, see "IBM Advanced
Settings Utility program" on page 113.
hardware
setup
configuration program
whether a later level is available from the CD
adapters and devices
operating-system installation
Chapter 3. Configuring the server
97
Hide quick links:
Advertisement
Table of Contents
