Ibm Advanced Settings Utility Program; Updating Ibm Systems Director - IBM x3630 M4 Type 7158 Installation And User Manual

16. Select OK to continue.
17. When the prompt Success is displayed, select OK.
Notes:
1. For further details on creating a software RAID array of hard disk drives, please
2. Some specific models may be shipped initially with four hard disk drives.
3. Software RAID is not supported in VMware 5 and VMware 4.1.
4. Software RAID is not supported in legacy configuration.
5. In order to install the legacy OS in the software RAID, you have to set the SCU

IBM Advanced Settings Utility program

The IBM Advanced Settings Utility (ASU) program is an alternative to the Setup
utility for modifying UEFI settings. Use the ASU program online or out of band to
modify UEFI settings from the command line without the need to restart the system
to access the Setup utility.
You can also use the ASU program to configure FoD features to Enable the optional
remote presence features or other IMM2 settings. The remote presence features
provide enhanced systems-management capabilities.
In addition, the ASU program provides limited settings for configuring the IPMI
function in the IMM2 through the command-line interface.
Use the command-line interface to issue setup commands. You can save any of the
settings as a file and run the file as a script. The ASU program supports scripting
environments through a batch-processing mode.
For more information and to download the ASU program, go to
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=TOOL-ASU.

Updating IBM Systems Director

If you plan to use IBM Systems Director to manage the server, you must check for
the latest applicable IBM Systems Director updates and interim fixes.
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
To locate and install a newer version of IBM Systems Director, complete the
following steps:
1. Check for the latest version of IBM Systems Director:
see the ServeRAID C105 documentation at http://www-947.ibm.com/support/
entry/portal/docdisplay?lndocid=MIGR-5089068.
Configuration may be able to expand to eight hard disk drives via Features on
Demand (FoD). Please note that the server may need to be restarted to activate
the feature. For more information on Features on Demand (FoD), including
instructions for automating the activation and installation of the activation key by
using IBM ToolsCenter or IBM Systems Director, see the IBM Features on
Demand User's Guide at http://www.ibm.com/systems/x/fod/ under the Help
section.
Controller as the first device in the option ROM execution order.
a. Go to http://www.ibm.com/systems/software/director/downloads/index.html.
Chapter 3. Configuring the server
113