Installing The Server Into The Rack - HP ProLiant ML350 User Manual

WARNING:
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
•
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against it.
•
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.

Installing the server into the rack

WARNING:
equipment:
Observe local occupational health and safety requirements and guidelines for manual
•
material handling.
• Get help to lift and stabilize the product during installation or removal, especially when the
product is not fastened to the rails. When the server weighs more than 22.5 kg (50 lb), at least
two people must lift the server into the rack together. A third person may be required to help
align the server if the server is installed higher than chest level.
Use caution when installing the server in or removing the server from the rack; it is unstable
•
when not fastened to the rails.
CAUTION:
Install the heaviest item first, and continue to populate the rack from the bottom to the top.
Install the server and cable management arm into the rack. Refer to the installation instructions that ship
1.
with the 3-7U Quick Deploy Rail System.
Install an additional extender bracket (included with the server) to the cable management arm. Refer to
2.
"Converting the cable management arm swing" in the installation instructions that ship with the 3-7U
Quick Deploy Rail System.
To reduce the risk of electric shock or damage to the equipment:
This server is very heavy. To reduce the risk of personal injury or damage to the
Always plan the rack installation so that the heaviest item is on the bottom of the rack.
Setup 35