Fbwc Module And Capacitor Pack Option - HP ProLiant ML350 User Manual

IMPORTANT:
is needed, use the Velcro strips provided in the option kit to attach additional battery packs.
Install the access panel (on page 27).
10.
Do one of the following:
11.
Close or install the tower bezel, as needed.
o
Slide the server back into the rack.
o
Power up the server (on page 24).
12.
For more information, see the documentation that ships with the option.

FBWC module and capacitor pack option

CAUTION:
pinout. Do not use this controller with cache modules designed for other controller models,
because the controller can malfunction and you can lose data. Also, do not transfer this cache
module to an unsupported controller model, because you can lose data.
To install the component:
Back up all data.
1.
Close all applications.
2.
Power down the server (on page 24).
3.
CAUTION:
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
Do one of the following:
4.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
5.
The server supports only one battery pack in the chassis. If more than one battery
The cache module connector does not use the industry standard DDR3 mini DIMM
In systems that use external data storage, be sure that the server is the first unit to be
("Open or remove the tower
Hardware options installation 80
bezel" on page 25).