Remove A Fan Blank - HP ProLiant ML350 User Manual

Remove a fan blank

Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
3.
Remove the large redundant fan air baffle, if installed
4.
page 27).
Remove the fan blank.
5.
("Open or remove the tower
("Remove the large redundant fan air
bezel" on page 25).
baffle" on
Operations 29