Hardware Options Installation; Introduction; Processor Option - HP ProLiant ML350 User Manual

G6
Hide thumbs Also See for ProLiant ML350:
Table of Contents

Advertisement

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause electrostatic discharge.

Processor option

The server supports single-processor and dual-processor operation. With two processors installed, the server
supports boot functions through the processor installed in processor socket 1. However, if processor 1 fails,
the system automatically boots from processor 2 and provides a processor failure message.
CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
processor without using the processor installation tool.
CAUTION:
configurations must contain processors with the same part number.
IMPORTANT:
installing the processor.
To install the component:
Update the system ROM.
1.
Locate and download the latest ROM version from the HP website (http://www.hp.com/support).
Follow the instructions on the website to update the system ROM.
Power down the server (on page 24).
2.
Do one of the following:
3.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
4.
Remove the large redundant fan air baffle, if installed
5.
page 27).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the server before
To avoid damage to the processor and system board, only authorized personnel
To help avoid damage to the processor and system board, do not install the
To prevent possible server malfunction and damage to the equipment, multiprocessor
If installing a processor with a faster speed, update the system ROM before
("Open or remove the tower
("Remove the large redundant fan air
Hardware options installation 37
bezel" on page 25).
baffle" on

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml350 g6

Table of Contents