Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
3.
Locate the cache module connector
4.
Open the cache module latches.
5.
Install the cache module.
6.
Connect the cable to the cache module.
7.
Connect the cable to the battery pack.
8.
Install the battery pack.
9.
("Open or remove the tower
("System board
components" on page 11).
bezel" on page 25).
Hardware options installation 79