Installing And Connecting The Router - Cisco 1900 series Hardware Installation

Installing and Connecting the Router

This chapter tells how to physically set up Cisco 1900 series integrated services routers. It contains the
following sections:
Safety Warnings, page 4-2
•
Setting Up the Chassis, page 4-3
•
Setting the Chassis on a Desktop, page 4-4
•
Wall-Mounting the Chassis, page 4-4
•
Rack-Mounting the Chassis, page 4-7
•
• Installing the Chassis Ground Connection, page 4-10
• Power Connections, page 4-12
• Connecting WAN and LAN Cables, page 4-13
Connecting to a Console Terminal or Modem, page 4-16
•
Cisco 1900 series routers are normally shipped with a complement of components that can be upgraded
or replaced to expand and enhance the router's functionality. These components either are inserted
internally into the router or are plugged into slots in the router chassis.
Note To see translations of the warnings that appear in this publication, refer to the
and Safety Information for Cisco 1900 Series Routers
Internal Modules
The Cisco model 1905 and Cisco 1921 have no user accessible internal modules.
Note
The router's internal components include the following:
DRAM
•
• Internal services module (ISM)
If you need to remove or upgrade either of these items, follow the procedures given in
Upgrading Internal Modules and FRUs in Cisco 1900 Series
Plug-In Modules
The following components plug into the router chassis:
WAN interface cards (WICs)
•
OL-19084-02
4
C H A P T E R
document that accompanies your router.
ISRs".
Cisco 1900 Series Hardware Installation
Regulatory Compliance
"Installing and
4-1