Installing And Connecting The Router; Safety Warnings - Cisco Rugged Series Installation Manual

Installing and Connecting the Router

This section describes how to install and connect the Cisco IR8340 router.
•
•
•
•
•
•
•
•

Installing and Connecting the Router

This section describes how to install and connect the Cisco IR8340 router.
Caution
Note

Safety Warnings

Warning
Installing and Connecting the Router, on page 23
Safety Warnings, on page 23
Before You Begin, on page 26
Unpacking the Router, on page 26
Installing the Router in a Rack, on page 27
Replacing the SD Flash Memory Card, on page 29
Connecting the Console Port, on page 30
Connecting WAN and LAN Interfaces, on page 31
For the optimum temperature ranges, do not operate it in an area that less than the minimum of -40°C
and exceeds a maximum recommended ambient temperature of 60°C.
To view specifications for the Cisco Catalyst IR8340 Rugged Series Router, see the IR8340 data sheet.
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
C H A P T E R
Cisco Catalyst IR8340 Rugged Series Router Hardware Installation Guide
3
23