Table of Contents
Advertisement
Installing and Connecting the Router
This document describes how to install and connect Cisco Connected Grid Routers (CGR) 2010 to a
LAN or WAN. The following sections provide technical details.
What you Need to Know, page 3-3
•
Before You Begin, page 3-4
•
Unpacking the Router, page 3-4
•
Installing the Router in a Rack, page 3-4
•
Connecting Power, page 3-7
•
•
Connecting to a Console Terminal or Modem, page 3-10
•
•
Connecting to the Auxiliary Port, page 3-16
•
Connecting WAN and LAN Interfaces, page 3-17
•
To see translations of the warnings that appear in this publication, see
Note
Series Regulatory Compliance and Safety
Caution
For the optimum temperature ranges, do not operate it in an area that less than the minimum of 40°C and
exceeds a maximum recommended ambient temperature of 60°C.
To view specifications for the 2010 CGR router, see the Cisco 2010 Connected Grid Router data sheet at:
Note
http://www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/data_sheet_c78_593509.html
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
OL-21559-01
C H A P T E R
Information.
Cisco Connected Grid Routers 2010 Hardware Installation Guide
3
Cisco Connected Grid Routers
3-1
Advertisement
Table of Contents
